CANADAIR CL-415
 

TEST FLEW MY CL-415 TODAY WENT WITHOUT A HITCH.
AUW 16.8 LBS
2 X MONSTER 46
2 X60 AMP ESC BEC DISABLED
13 X8 APC 2 BLADED
2200 MAH RECV. PACK
2 X 4000 20C 4 CELL LIPOS IN PAR.
FLEW LIKE A HEAVY TRAINER AND FACTORY C.G. WAS RIGHT ON.OVERALL I GOOD MODEL.PEOPLE SAYING AUW 13LBS. IS FAlse and a 3 bladed prop would be death with this power set up

RE: CANADAIR CL-415
 

Are you going to do sea trials or is it not water proof? Looks great

RE: CANADAIR CL-415
 

Very nice airplanes.


Eric

RE: CANADAIR CL-415
 

tx.easy to have nice planes when you buy from nitro

RE: CANADAIR CL-415
 

Hi Gardenia
Congratulation. I am building the same plane. I finished the wings, the elevators and the rudder. Now, I try to install some air retracts, first the front gear and after that, I hope to be sucessful with a own built main gear.
I think, that my maiden would be in spring this year. Let's see.
I wish you all the best and best regards from switzerland
Daniel

RE: CANADAIR CL-415
 

THANK YOU
ANY QUESTIONS EMAIL ME [email protected] GOOD LUCK

RE: CANADAIR CL-415
 

Hi,
For those interested on seeing an fpv nitro cl-415 setting, here are somes pictures..

Kit description:

- total airplane weight is 16.2 pounds
- 2 e-flite power 46
- 10,000 mah battery
- ice 50 esc bec enable
- xoar 13 x 8 2 bladed props

I am using a Thomas scherrer long range 433 mhz TX-RX and a 8 watt booster attach to a multiplex royal evo 9 radio

this plane is flying just great on water, soft snow and the range is about 10 km..... I can fly further but... if you want to bring it back on battery power, just play on the 5 km range!!!!!!

cheers

yvon
<h3 class="r"></h3>

RE: CANADAIR CL-415
 

very nice