Dynamite TNT .12R
#1
Junior Member
Thread Starter
Join Date: Apr 2002
Location:
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Dynamite TNT .12R
i have this motor on my Losi GTX, and man did it ever scream if i could get it to run long enuff, anyways i overrevved it and broke the connecting rod and bent the piston skirt, about $50 worth of damage.
i found the piston and sleeve for the 12R motor but i could not find the connecting rod for it, i looked at Horizon Hobby, which is Dynamites main distributor, and they dont have the rod, i was wondering if the rod for the 12S/12SPD would work for my motor, if not i think i will just have to machine one at school, dont worry we have a lathe and all that good stuff to machine things like that, let me know asap before i start machining, any help would be greatly appreciated thanks
i found the piston and sleeve for the 12R motor but i could not find the connecting rod for it, i looked at Horizon Hobby, which is Dynamites main distributor, and they dont have the rod, i was wondering if the rod for the 12S/12SPD would work for my motor, if not i think i will just have to machine one at school, dont worry we have a lathe and all that good stuff to machine things like that, let me know asap before i start machining, any help would be greatly appreciated thanks
#2
Senior Member
My Feedback: (2)
Join Date: Jan 2002
Location: Tuscola,
IL
Posts: 2,636
Likes: 0
Received 0 Likes
on
0 Posts
Dynamite TNT .12R
Hi, Nagga! Sorry I am not famliar with a 12SPD motor. Perhaps its another dynamite product? This forum is for OS engines support only. Sorry we wouldn't know if an OS crank would fit in another brand of engine. You might try asking in the general engine forum.