DX7 on Seperate Elevators
#1
Thread Starter
My Feedback: (13)
Join Date: Jan 2003
Location: Greenville,
OH
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
DX7 on Seperate Elevators
I am trying to set up the Elevators using the DX7 Spectrum trans. and I cannot get them to both work that same on the Down! On the up it works fine, what adjustment am I missing here? I have tried the Aux2 settings, travel adjust ment settings and the rate settings on the mix...Can anyone help me figure this out? Thanks.
#3
Senior Member
My Feedback: (1)
Join Date: Apr 2008
Location: mesquite,
NV
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
RE: DX7 on Seperate Elevators
go here, it might help
http://www.rcaerobats.net/Spektrum/d...l_ailerons.htm
bob put this on his site
its mike mcconville's write up for using dual elevators and ailerons
woops. just noticed you figured it out
http://www.rcaerobats.net/Spektrum/d...l_ailerons.htm
bob put this on his site
its mike mcconville's write up for using dual elevators and ailerons
woops. just noticed you figured it out