Mully911

Hi all
I've been out of the RC plane world for a while and just getting back into it.
I dusted off my optic six transmitter and bought an anylink plane. I will use my tx.
I want to keep the throttle on the left and the Rudder and elevator on the right on my transmitter. can someone walk me through this step-by-step?
i had this All set up and then I screwed something up and I can't get it back.


thanks in advance
mully

CMAN

Hi, Im not sure if you solved this yet but this is how I got mine to work on my little flyzone cub http://www.tx-ready.com/quick-start/link-micro.html go to that site and click on the button at the bottom of the window saying "how to move rudder control to the right stick"

Good luck

Mully911

Yes I went to that site a while back and found out that if you on plug the transmitter from your remote while it's on it goes in to some other mode you have to repeat the steps to get it back into the second mode for it to work with rudder /elevator on rt stick

CMAN

did you get it to work?

Mully911

Yes you have to unplug the Anylink transmitter from your radio with the power on that resets the anylink
back to normal mode