Help me find a replacement motor and electronics
#1
Thread Starter
Join Date: Aug 2007
Location: Pittsfield,
MA
Posts: 1,610
Likes: 0
Received 0 Likes
on
0 Posts
Help me find a replacement motor and electronics
Hello, I have a Mini Trainstar Super Cub Piper J-3 with a 6-axis and self-stabilization that I need to replace the bad motor and servo/ESC/receiver tray.
- Wingspan: 15.7" (400mm)
- Length: 12.2" (310mm)
- Height: 4.1" (105mm)
- Flying Weight: 1oz (30g)
- Battery: 3.7V 180mah LiPo
- Servo: 2 x 1.3g
- Brushed Motor: Coreless 8MM
- Gyro: 6-Axis
By looking at the photos can you tell me which of the two motors would fit it best? I could not find the 8mm one.
HobbyKing™ EPS-7 Geared Brushed Motor System
https://hobbyking.com/en_us/hobbykin...___store=en_us
HobbyKing™ EPS-8.5 Geared Brushed Motor System
https://hobbyking.com/en_us/hobbykin...___store=en_us
Also, where can I find the replacement servo/ESC/receiver tray?
Thank you
- Wingspan: 15.7" (400mm)
- Length: 12.2" (310mm)
- Height: 4.1" (105mm)
- Flying Weight: 1oz (30g)
- Battery: 3.7V 180mah LiPo
- Servo: 2 x 1.3g
- Brushed Motor: Coreless 8MM
- Gyro: 6-Axis
By looking at the photos can you tell me which of the two motors would fit it best? I could not find the 8mm one.
HobbyKing™ EPS-7 Geared Brushed Motor System
https://hobbyking.com/en_us/hobbykin...___store=en_us
HobbyKing™ EPS-8.5 Geared Brushed Motor System
https://hobbyking.com/en_us/hobbykin...___store=en_us
Also, where can I find the replacement servo/ESC/receiver tray?
Thank you
Last edited by shd3920; 12-17-2017 at 02:17 PM.