WingDragon CG and batt Q
#1
Junior Member
Thread Starter
Join Date: Aug 2004
Location: , AUSTRALIA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
WingDragon CG and batt Q
Hi,
just received the WingDragon2.
I can't find the location of CG in the description - any ideas?
Also, I'm going to put heavy electronics/batt into it. 20kHz PWM SC, 8 cell 1200mAh NiMH.
From what I've read, the average take off weight is around 550gms.
The batt. I intend to put in, weighs 200gms, and the electronics 130gms (includes servos).
My WD2 will weigh around 750gms which should make it faster too.
Any comments welcome,
thx.
just received the WingDragon2.
I can't find the location of CG in the description - any ideas?
Also, I'm going to put heavy electronics/batt into it. 20kHz PWM SC, 8 cell 1200mAh NiMH.
From what I've read, the average take off weight is around 550gms.
The batt. I intend to put in, weighs 200gms, and the electronics 130gms (includes servos).
My WD2 will weigh around 750gms which should make it faster too.
Any comments welcome,
thx.