Charger Help
01-05-2007, 03:47 PM
#1
Member
Thread Starter
Join Date: Mar 2006
Location: Senoia,
GA
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Charger Help
Hey guys I need some help with choosing a good charger for my two GWS 9.6V 750 mah batteries. They are the NiMh type. I was wondering if this charger would work, and if not what one would do the job. I pretty much need an AC charger b/c I live in the dorms at college. Thanks for the help.
[link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXCJE2&P=0]This one[/link]
[link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXCJE2&P=0]This one[/link]
01-05-2007, 03:54 PM
#2
Join Date: Feb 2006
Location: Peoria , AZ
Posts: 497
Likes: 0
Received 0 Likes
on
0 Posts
RE: Charger Help
That charger will work....However you are limited to a max charge rate of 800mah making charging the nimh a little on the lenghty time side. But it will work. It just won't fast charge.
PS. The charger won't really work on larger batteries well and won't accept any more than 8 cells. 8 cells @ 1.2 volts per cell is 9.6 volts so you are *****g the amount of voltage right now.
PS. The charger won't really work on larger batteries well and won't accept any more than 8 cells. 8 cells @ 1.2 volts per cell is 9.6 volts so you are *****g the amount of voltage right now.
01-05-2007, 06:05 PM
#4
Join Date: Feb 2006
Location: Peoria , AZ
Posts: 497
Likes: 0
Received 0 Likes
on
0 Posts
RE: Charger Help
This won't work with his battery. It only charges NICD...not Nimh. also it only charges 6 and 7 cell paks where he has 8 cells. 9.6 volts.
ORIGINAL: AirforceRcks
try this
[link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXD548&P=0]http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXCLD5&P=0[/link]
try this
[link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXD548&P=0]http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXCLD5&P=0[/link]
01-05-2007, 11:57 PM
#6
Senior Member
Join Date: Jun 2006
Location: crawfordville,
FL
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
RE: Charger Help
jetboy11914: Go to wall-mart , they've got 9.6 volt flat packs with charger for 14$ ( the chager will work on you GWS batt, just fine,)your bub, scoooper
01-06-2007, 02:48 AM
#7
Senior Member
My Feedback: (325)
Join Date: Mar 2003
Location: LaGrange, OH
Posts: 14,857
Likes: 0
Received 0 Likes
on
0 Posts
RE: Charger Help
ORIGINAL: jetboy11914
Hey guys I need some help with choosing a good charger for my two GWS 9.6V 750 mah batteries. They are the NiMh type. I was wondering if this charger would work, and if not what one would do the job. I pretty much need an AC charger b/c I live in the dorms at college. Thanks for the help.
[link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXCJE2&P=0]This one[/link]
Hey guys I need some help with choosing a good charger for my two GWS 9.6V 750 mah batteries. They are the NiMh type. I was wondering if this charger would work, and if not what one would do the job. I pretty much need an AC charger b/c I live in the dorms at college. Thanks for the help.
[link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXCJE2&P=0]This one[/link]
That's a perfect charger for your batts.
