hip to be square...new plane
02-22-2003, 04:24 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2003
Location: Mineral Wells (DFW), Texas
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
hip to be square...new plane
Hello all,
I have been hanging around ezone, but I thought I would check it out over here. I'm not new to electrics...in fact that is all I fly anymore. I had to tell someone about my new plane. 18" X 18" with elevons. It also has a controllable rudder. AUW is under 6.5 oz with 324 squares of wing. One flight so far in light wind, and it seems to fly well. Loops and rolls good. It flys hands off inverted or right side up. High AOA seems good. First indoor flight tonight in Lewisville Tx. It is powered with a GWS A drive and 2s1p kokam 1020 pack.
Check out my revised website...lots of my own designs and videos. www.michaelconnally.com
I have been hanging around ezone, but I thought I would check it out over here. I'm not new to electrics...in fact that is all I fly anymore. I had to tell someone about my new plane. 18" X 18" with elevons. It also has a controllable rudder. AUW is under 6.5 oz with 324 squares of wing. One flight so far in light wind, and it seems to fly well. Loops and rolls good. It flys hands off inverted or right side up. High AOA seems good. First indoor flight tonight in Lewisville Tx. It is powered with a GWS A drive and 2s1p kokam 1020 pack.
Check out my revised website...lots of my own designs and videos. www.michaelconnally.com
