please help
#1
Member
Thread Starter
Join Date: Mar 2003
Location: cheltenham, UNITED KINGDOM
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
please help
Hi all i am planning on building a small park flyer. I have 2 union red servos spare, rx, speed controller, 250mah 7 cell sanyo pack laying around. i wont to build some thing cheap may be out of correx. probaly looking somrthing like an IFO do you think this will work and what motor/prop shall i use? this is my first time building a park flyer. comments please.
#2
Senior Member
Join Date: Mar 2002
Location: Reading, UNITED KINGDOM
Posts: 904
Likes: 0
Received 0 Likes
on
0 Posts
please help
Depends how you want it to fly. I'd say Correx is way too heavy for that gear, you'd be better off with Depron. If you're looking for something aerobatic you can build an And_Now or a Nutta from http://www.flyelectric.ukgateway.net/
Steve
Steve
#3
Junior Member
Join Date: Mar 2003
Location: Las Cruces, NM
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
please help
I would recommend a Cessna or L-19 from www.foamflyers.com These are built out of sliced blue insulation foam and sturdy board. Total investment for many planes just a couple of bucks. If you want to get into fun aerobatics, try the Jalapeño. The Cessna will work with the equipment you have.
Mike
Mike