gws beaver abuse
#1
Junior Member
Thread Starter
Join Date: Feb 2003
Location: N.Ridgeville,Ohio
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
gws beaver abuse
I have a 2wk old beaver and I thought how hard could it be to fly. I have never flown an airplane though and to my suprise it is alot different than my rc truck. Ithink its time for aclub so thats what I'm doing now. but my hats off to gws I was worried about crashing and crashing I'v done 8 times with only 2 semi successful flights this is a durable craft no major damage just a little reinforced packing tape and 5 min. epoxy and I am ready to learn from an instructor
#2
Senior Member
My Feedback: (8)
Join Date: Jan 2003
Location: Lincoln,
AR
Posts: 447
Likes: 0
Received 0 Likes
on
0 Posts
gws beaver abuse
Give some consideration to a GWS Slow Stick. Just $35 more dollars and it should be easier to fly. Also, all of your radio gear will drop right into the SS.
bugleboy
bugleboy
#5
Junior Member
Join Date: Mar 2003
Location: Oregon
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
gws beaver abuse
Originally posted by phat742
try putting two wattage powerfan 400f ducted fans against the fuselage under the wing and run ten cells to them. the thing wants to go straight up.
try putting two wattage powerfan 400f ducted fans against the fuselage under the wing and run ten cells to them. the thing wants to go straight up.
Did you realy put fans on your Beaver?
#6
My Feedback: (21)
Join Date: Jul 2002
Location: Spencerport, NY
Posts: 7,350
Likes: 0
Received 0 Likes
on
0 Posts
gws beaver abuse
Wow, I hope you did the wing reinforcement modification they describe on the Horizon website. In a slight dive the wings on mine would start quivering. It really looked like they were made of water.
#7
Member
Join Date: Mar 2003
Location: las vegas,
NV
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
the wanna-be jet beaver
i had the entire wing covered in fiber tape and carbon fiber strips along the front of the wing. the wing still had the flutter effect on it though.i had almost a whole roll of fiber tape on the whole plane holding the fans on and covering the wing. if you were wondering the beaver isn't as aerodynamic as it should and when i would throttle it up it would just want to go up. i took the fans off and right now i am trying to attatch it to the top of my hawk like the soon to be released turbo hawk from wattage.