Putting a slo-v together for indoor
#1
Thread Starter
Join Date: Mar 2006
Location: U.P.,
MI
Posts: 8,048
Likes: 0
Received 0 Likes
on
0 Posts
Putting a slo-v together for indoor
I have a few of these slo-v's and have yet to fly one of them with any success. I set them in a place and haven't touched them in over a year.
I am using stock servo's for the first one. I have a CC 9a esc, gws pico rx, park 300 outrunner 1380kv. I plan to use a 2s lipo. Does anyone know what prop I should be starting with?
Kevin
I am using stock servo's for the first one. I have a CC 9a esc, gws pico rx, park 300 outrunner 1380kv. I plan to use a 2s lipo. Does anyone know what prop I should be starting with?
Kevin
#2
Senior Member
Join Date: Feb 2007
Location: glasgow, , UNITED KINGDOM
Posts: 3,349
Likes: 0
Received 0 Likes
on
0 Posts
RE: Putting a slo-v together for indoor
Mr Mugen, hiya..... I've got the Slow Stick but its a very similar set-up to your Slow-V as far as b/less and 2S go. I started with a 10 x 5 but have now narrowed it down to 9 x 5 to keep things cool, awesome performance!!! But mine is now converted to a folding prop same size, to avoid breakages and its working. Trial and error, you should nail it with your experience mi amigo....
#3
Thread Starter
Join Date: Mar 2006
Location: U.P.,
MI
Posts: 8,048
Likes: 0
Received 0 Likes
on
0 Posts
RE: Putting a slo-v together for indoor
Thanks for your insight. I put a 7x5 on it for now (until I can try it). I metered it and got 5a so it will not be too much....I hope. It's a starting point I guess.