SUPER Cox F4U Project: "Blue Thunder"
08-16-2008, 05:31 PM
#1
Junior Member
Thread Starter
Join Date: Jul 2007
Location: Kalispell,
MT
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
SUPER Cox F4U Project: "Blue Thunder"
Ok so i was at my LHS today and I came apon the Cox Micro Warbird replacement parts stock. Now Mind you I know these have been out for a long time but I never had much interest. I looked at the F4U pondering about how I could fabricate a tail but I didnt think it was worth it. I got to thinking more on how I have a E-flite 250 brushless motor and 15amp esc...and a few extra Spectrum servos...
Then my good friend Briggs who works there told me they dont order from Cox anymore and they would make me a deal on the parts...
So I bought it...
Another interesting fact...
The motor recomended for this bird is a 130 brushed motor and a 5amp esc... with a small NiMh pack...
I putting a Park 250 Brushless and a 10amp esc and a 7.4v 800maH Lipo pack...and a specktrum 3ch reciver
This
Bird
Will
HAUL
Then my good friend Briggs who works there told me they dont order from Cox anymore and they would make me a deal on the parts...
So I bought it...
Another interesting fact...
The motor recomended for this bird is a 130 brushed motor and a 5amp esc... with a small NiMh pack...
I putting a Park 250 Brushless and a 10amp esc and a 7.4v 800maH Lipo pack...and a specktrum 3ch reciver
This
Bird
Will
HAUL
