Curtiss Jenny
05-28-2003, 11:36 AM
#1
Member
Thread Starter
Join Date: Jun 2002
Location: Shelburne, VT
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Curtiss Jenny
I started this project a little ofer 2 years ago.
Dare Jenny, 14.2oz, GWS 300 5.33:1, 9x6, 2s2p 1020mah LiPoly, MRX4, Pixie-20p, 3 HS-55, Azaar antenna, LiteSpan, McGonigal Inkjet decals.
At first she was rather ill-mannered. A lot of adverse yaw, I had to mix in about 40% rudder throw, then she smoothed out.
All control surfaces are pull-pull. I am especially proud of the aileron pulley system, scale layout.
I have about 10 flights on her and she flies about 12 minutes at 2/3 throttle. Slow and beautiful, if I do say so myself.
Dare Jenny, 14.2oz, GWS 300 5.33:1, 9x6, 2s2p 1020mah LiPoly, MRX4, Pixie-20p, 3 HS-55, Azaar antenna, LiteSpan, McGonigal Inkjet decals.
At first she was rather ill-mannered. A lot of adverse yaw, I had to mix in about 40% rudder throw, then she smoothed out.
All control surfaces are pull-pull. I am especially proud of the aileron pulley system, scale layout.
I have about 10 flights on her and she flies about 12 minutes at 2/3 throttle. Slow and beautiful, if I do say so myself.
