RCU Forums - "castle creations" phoenix edge arming lockout harness and key with lanyard assembly]

"CASTLE CREATIONS" PHOENIX EDGE ARMING LOCKOUT HARNESS AND KEY WITH LANYARD ASSEMBLY] in original package, "3" units available
$16.50 each shipped CONUS"verified address" PayPal only
Will work with any ESC

The Castle Creations Arm Lock Key Harness attaches to the AUX LINE and the receiver, and is designed to act as an extra safety measure while operating your RC Heli or Airplane*. When the key is fully seated into the socket, the controller will be incapable of arming. Once the key is removed, the ESC will arm when it receives the low throttle command on the traditional throttle line. If the key is inserted while the motor is running, the ESC will go into the ARM LOCKOUT state stopping the motor from running and preventing the ESC from arming.
contact me by PM or at @ "[email protected]"`