RCU Forums - P3 Revolution 60cc elec build NEW Never flown

HANGAR 9
P3 Revolution 60cc ARF
NEW BUILD 99.8% Complete

Friends do I have a beautimus aircraft for-sale. One of our customers started this build when this air-frame was released
Taking time to make sure it was built with all quality components and done right... His eye started to fail so in his mind BIGGER WAS BETTER
It was a great way of thinking however his sight worsened faster than the build could be completed. So this plane is the blessing from this story.
It will make someone a very happy pilot making it possible to fly this plane for a fraction of the build cost which is less than 1/3.
He never did get around to ordering a prop but we will provide a (in stock) wooden prop with the plane
Plane can be delivered to:
ALAMO SWAT MEET IN AUSTIN TX Sept. 27th and 28th
Best Electric Fly in swap meet in Willis TX @ Tri County Barnstormers
Bomber meet in Willis Tx
Or
Oct 19th BIG BIRD fly in in Willis tx at the same field.

Also Inquire about our IN-HOUSE LAYAWAY
Making almost anything possible

What we have listed
AIRFRAME
P3 Revolution 60cc ARF 78" (HAN4630)
Wingspan: 78 in (1982mm)

MOTOR
Eflite 360
ESC
CASTLE HV 160

Receiver:
AR12310T 12CH PowerSafe
With Integrated Telemetry RX and Satellites
SERVOS:
Hitec HS-5585MH Coreless High-Torque MG
AND
HS-7954SH High-Voltage Ultra-Torque Dual BB
Control Arms:
Extreme Flight Anodized Aluminum Arms

What Else?
Removable (2 Thumb Screws) Battery tray with straps
Setup for 2 6s 5000mah to 6000mah

Remove Before Flight Safety Flag and kill switch

Spektrum Satellite receivers

Aluminum Spinner

Red mesh wire wrap

and much more

The condition is everything you would expect from a new plane and then some.
This air-frame was hand picked and fully inspected.
All work that has been completed on this plane was done NOT BY OWNER
The full assembly was completed by a professional plane builder and pilot.

There was well over 3 grand spent on this build after parts shipping and labor

SHIPPING
Well, now for the fun stuff. Most people cringe at the thought of shipping such an aircraft. I must admit I would rather have this byrd placed by hand in a trailer or the back of a truck but... We are known for shipping large planes and have been very successful doing so . I will provide a link so you can see how we go about the shipping process.
We use Greyhound Shipping....
I think the motto is
https://www.flyinggiants.com/forums/...es/biggrin.gif" Our shipping may be slow, But it"s GOOD n SLOW" https://www.flyinggiants.com/forums/...es/biggrin.gif
The old motto
"If you want to complain about price use the other guys but if you want to complain about speed GO GREYHOUND"
was just too wordy https://www.flyinggiants.com/forums/...s/rolleyes.gif
Shipping fee will be between 125.00 and 185.00 anywhere in the lower 48 states You will be responsible for picking the crate up from your local bus station or we can find an UBER to bring the crate to your home address