RCU Forums - Futaba 14SGA 14-Channel Air Computer System

Brand new in the box Futaba 14SGA 14-Channel Transmitter, Receiver, Switch Harness, Transmitter Battery and complete manual. And, four new metal gear Savox Servos.

channels: 12 proportional, 2 switched
Compatible with FASSTest, FASST and S-FHSS protocols
FASSTest telemetry compatible with Futaba telemetry sensors (sold separately)
Free user-updatable software
30-model memory
10-character user naming
10-character model naming
Airplane, helicopter and glider programming
Large, 1.75 x 3 backlit LCD screen with 128 x 64 resolution
SensorTouch programming
Compatible with secure digital memory cards for external storage of model setups and software updates (32MB-2GB or HC (High-Capacity) 4GB-32GB)
Left and right assignable slider switches
Two assignable rotary knobs
Six assignable three-position switches
One assignable momentary two-position switch
One assignable two-position switch
Comfortable rubber grips on the sides and back

Wide top switch spacing
Adjustable stick tension
Dual ball bearing gimbals
4 vibration warning types
Home/Exit; User Menu/Servo Monitor buttons
Audio earphone jack (for telemetry alarms)
6V 1800mAh NiMH battery pack
User stick calibration
Trainer system
Servo speed adjust
5 programmable mixes
V-tail, Ailvator, winglet, motor mixing
Trim mix
Logic switch (condition switch only)
Internal programmer for S.Bus servos
User menu
Servo monitor (neutral and moving tests)
2 count up/countdown timers
Integral timer
Model timer
Quick model select

Also, Included are 4 Savox metal gear high torque channels. Only one of these servos has been opened (never used) and the other three are still Shrink wrapped.

One Savox SH-1290MG
Specifications:

Speed @ 6.0V: 0.04 sec/60°
Torque @ 6.0V: 69 oz-in / 5 kg-cm
Weight: 56.4g
Type: Standard
Gear: Metal
Case: AluminumHeatsink
Case Size (LxWxH): 40.3x20x37.2mm

Three Savox SC-1257TG
Specifications:

Speed @ 6.0V: 0.07 sec/60°
Torque @ 6.0V: 138 oz-in / 10 kg-cm
Weight: 52.4g
Bearing: Dual
Type: Standard
Gear: Titanium and Aluminum
Case: Aluminum Heatsink
Output Shaft: 25T Spline (Futaba)
Case Size (LxWxH): 40.3x20x37.2mm

I'm selling because I was trying to get back into the hobby, but with two full time consulting jobs I just don't have the time. I have receipts to prove that I bought these items within the past few months.

Buyer pays $25.00 for shipping. And, I will only accept PayPal. I will only ship within the United States