Profile for 26cc gas
#4
Senior Member
My Feedback: (57)
Join Date: Mar 2008
Location: Greenwood,
IN
Posts: 1,111
Likes: 0
Received 0 Likes
on
0 Posts
RE: Profile for 26cc gas
ORIGINAL: doublesixes
I'm looking for a 3d profile to fit a RCGF 26cc gasser in. Is the CH Tunnel Vision to big and heavy for it?
Thanks
I'm looking for a 3d profile to fit a RCGF 26cc gasser in. Is the CH Tunnel Vision to big and heavy for it?
Thanks
More appropriate, the motor is too heavy for all out 3D. Might be OK for a funflyer. Go glow or electric under 50CC size.
#5
Senior Member
Thread Starter
Join Date: Sep 2005
Location: santa ana,
CA
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
RE: Profile for 26cc gas
That Kat profile looks nice but it does not list weight or wing area. A video would be nice too
As far as a 26cc's ability to perform 3d, is somewhat debatable. I have seen a Funtana X100 fly decently including some 3d with a CRRC Pro in the nose. I would think that the right sized profile would out-fly the Tana. JMHO
From specs, this RCG I now have has a bit more power at basically the same weight. It can spin a 18X8 at around 7k. It should suffice to move a 10 pound bird with authority.
I used to have a CRRC Pro 26GFi that replaced a ST2300 on a 72 inch Extra and the gasser showed a clear advantage over the glow engine, especially in the low to mid ranges.
As far as a 26cc's ability to perform 3d, is somewhat debatable. I have seen a Funtana X100 fly decently including some 3d with a CRRC Pro in the nose. I would think that the right sized profile would out-fly the Tana. JMHO
From specs, this RCG I now have has a bit more power at basically the same weight. It can spin a 18X8 at around 7k. It should suffice to move a 10 pound bird with authority.
I used to have a CRRC Pro 26GFi that replaced a ST2300 on a 72 inch Extra and the gasser showed a clear advantage over the glow engine, especially in the low to mid ranges.
#6
Senior Member
My Feedback: (4)
Join Date: Oct 2007
Location: St. Louis,
MO
Posts: 1,320
Likes: 0
Received 0 Likes
on
0 Posts
RE: Profile for 26cc gas
This one has a video link... http://rcchina.com.cn/oscn/product_i...roducts_id=414
This is my 63" profile yak-54 with a RCGF 20cc in it... http://www.youtube.com/watch?v=SveTee_jfKk
This is my 63" profile yak-54 with a RCGF 20cc in it... http://www.youtube.com/watch?v=SveTee_jfKk