hostetler skymaster
02-16-2002, 07:29 PM
#1
Junior Member
Thread Starter
My Feedback: (3)
Join Date: Jan 2002
Location: FL
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
hostetler skymaster
Anyone out there have any experience with building the Cessna
Skymaster from Wendell Hostetler Plans and wood kits from Precision kit cutters or All American kit cutters. I have all the info on the support equipment ie: cowls etc. just need to know if there is a great deal of sheeting and fiberglass work, and what snags or building problems encountered in the completion of the model. Thanks for any info.
[email protected]
Skymaster from Wendell Hostetler Plans and wood kits from Precision kit cutters or All American kit cutters. I have all the info on the support equipment ie: cowls etc. just need to know if there is a great deal of sheeting and fiberglass work, and what snags or building problems encountered in the completion of the model. Thanks for any info.
[email protected]
02-17-2002, 01:42 PM
#3
Junior Member
Thread Starter
My Feedback: (3)
Join Date: Jan 2002
Location: FL
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
hostetler skymaster
I fly with the MacDill Flyers on MacDill. You may know some of our members who have joined Bay City since access to MacDill is restricted to "accompanied only status" I also belong to Bay City Flyers, but because of the distance from my home and the upkeep on our field at Mac Dill, I fly at MacDill when I get the chance.
02-21-2002, 03:13 AM
#4
Senior Member
Join Date: Feb 2002
Location: Central, NJ
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
hostetler skymaster
I've been working on the Skymaster on and off for about 2 years now. I cut my own parts (big mistake). The parts cutting was difficult with everything shown on the plans in half. I would highly recomend buying the kit. I believe the plans call for it to be all glassed. I have seen one with retractable gear and would sure like to know how that was done. How far are you on this project?
