Do Tru-Turn Spinners fit Bolly Props?
#1
Senior Member
Thread Starter
Join Date: Apr 2004
Location: SydneyNSW, AUSTRALIA
Posts: 932
Likes: 0
Received 0 Likes
on
0 Posts
Do Tru-Turn Spinners fit Bolly Props?
Can anyone tell me if Tru-Turn spinners will fit bolly props without modifications?
The size in question is a 2 1/4" spinner with Bolly 12.5 x 6 prop on a Saito .62 (7mm shaft).
Thanks
The size in question is a 2 1/4" spinner with Bolly 12.5 x 6 prop on a Saito .62 (7mm shaft).
Thanks
#4
RE: Do Tru-Turn Spinners fit Bolly Props?
ORIGINAL: CustomPC
Can anyone tell me if Tru-Turn spinners will fit bolly props without modifications?
The size in question is a 2 1/4" spinner with Bolly 12.5 x 6 prop on a Saito .62 (7mm shaft).
Thanks
Can anyone tell me if Tru-Turn spinners will fit bolly props without modifications?
The size in question is a 2 1/4" spinner with Bolly 12.5 x 6 prop on a Saito .62 (7mm shaft).
Thanks
G'day Mate,
I just bought a 3" tru-turn, I ordered it online, direct from Tru-Turn, http://www.truturn.com/
When you place your order, for whatever spinner you need, you can state the prop brand & size that you intend to use, In my case, I ordered the spinner, & stated the size APC prop, they Emailed me, to advise that the spinner I ordered would not fit, & gave me an alternative, so I changed my order, & the spinner was here, in about 9 days, perfect fit & perfect balance.
Absolutely brilliant service.
Here's my spinner.
#5
Senior Member
Join Date: Oct 2006
Location: Newton,
KS
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
RE: Do Tru-Turn Spinners fit Bolly Props?
I bought a generic Tru-Turn for my Ultra Sport and the only prop I found that would fit without cutting was an old Master Airscrew I had. Everything else, the blades were too thick to fit the slot. I ended up having to cut and balance it myself to fit an APC.