OS engine overhaul
#1
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Surrey, BC, CANADA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
OS engine overhaul
I've got an 18 year old OS 40sf. I'd like to replace the bearings but I'm having trouble removing the drive hub. It's not the standard "flat spots on the crank and hub"type. It appears to be a press fit with a split collar between the crank and hub. Can anyone help with some advise?[]
Cheers
Eagle_63
Cheers
Eagle_63
#4
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Surrey, BC, CANADA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
RE: OS engine overhaul
Thanks a bunch guys.[)] Got her done with a coller around the hub and a 2-jaw puller. She was on tight.[:@] Now it's off to the bearing store.
Cheers
Eagle_63
Cheers
Eagle_63