RE: servo reversing y-harness
Imagine mounting the servos 90 degrees away from their 'normally' mounted postion from the fuse sides. You will have the side of the servo attached to the fuse and not the servo mount lugs. One servo will point down and the other will point up. Of course, you will have to insulate the servo from vibration, will need ball-links and all of that. If it still doesn't make sense then I will try to get an image on next post.
|
RE: servo reversing y-harness
Gotcha. I get what you were saying. I checked out the geometry and it wouldn't work. http://www.rcuniverse.com/forum/js/f...msn/crying.gif
So I think I'm headed towards the Electro Dynamics servo reverser eventually. Thanks everyone for your great creativity and suggestions. |
RE: servo reversing y-harness
It's better to do it with an extra channel on your radio if you can, but this should work too. |
All times are GMT -8. The time now is 05:45 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.