best way to side mount a servo
 

whats the best way to side mount a serv inside the wing , so that only
the arm sticks out?

thanks

Dan

RE: best way to side mount a servo
 

Here's how I did it.
Only diff is my servo horn does not stick out of the wing, only the pushrod.
Push rod is nice and straight.

Red cross hatching was added to the image to show where a 1/32" piece of ply is used to tie the 2 servo mounting blocks together. Another 1/32" piece of ply is used in similar fashion on the other end of the servo (facing away from camera).

-E

RE: best way to side mount a servo
 

Better to mount the srevo to the hatch. That way when you remove the hatch, the servo is right there and easy to get at.

RE: best way to side mount a servo
 

thanks for the ideas