RCU Forums

RCU Forums (http://www.rcuniverse.com/forum/)
-   R/C Sky Diving (http://www.rcuniverse.com/forum/r-c-sky-diving-474/)
-   -   how many servos for RCSkydiving (http://www.rcuniverse.com/forum/r-c-sky-diving-474/7862261-how-many-servos-rcskydiving.html)

dyl55 08-19-2008 08:32 AM

how many servos for RCSkydiving
 
hi everybody i've buy the Micro Skydiver Generation II Package (freefall)
on RCSkydiving and i just want to know how many servos i need. I know i need 2 hitec hs82MG but i don't know if i need one micro servo ? I precise it's for in the skydiver i know i do put one normal servo ( or micro ? ) for the drop box. Thanks and sorry for my bad english because i'm french

ps:I have not yet received the package

dasintex 08-19-2008 12:12 PM

RE: how many servos for RCSkydiving
 
If you free fall; one Micro Servo to pull the release pin; and a regular standard size servo for drop box; and the 2 you mentioned for the arms.

dyl55 08-19-2008 01:30 PM

RE: how many servos for RCSkydiving
 
ok total: 4 servos : 3 for skydivers ( 2 hs 82MG and 1 hs 55) and one for drop boxe

ennyka 08-19-2008 02:19 PM

RE: how many servos for RCSkydiving
 
The Rc Skydiving micro only uses TWO servos in the diver thats all that will fit in there you will see. The micro drop box can use any servo I use the HS-55 with tape to the side of the box. To freefall the diver uses the same servo in it to pull the chute. You will see this will be easy for you when you get it in and look at it. Have fun and happy falling. I have two micros and one ultimate from RCSkydiving.com (check out the little orange guy on his website that is one of mine, MJ is his name LOL) all togehter for the Diver to have full drop and freefall from the diver TX I use TWO recievers, one in the diver of coarse and one binded to the same model (Spektrum) in the plane for the drop box, and THREE servos Two in the diver and one on the Box.


dyl55 08-19-2008 02:30 PM

RE: how many servos for RCSkydiving
 
ok thanks i'm so impatient to receive this. Last question my friend have a plane with 8cc engine is it powerful enough for wear the skydiver ?

skydiver 08-19-2008 04:15 PM

RE: how many servos for RCSkydiving
 
Hi,

Where in Belgium do you live? Lundy (jules) lives in Lommel and is an expert on skydiving. I know he can help you.

pr

pieter 08-19-2008 05:13 PM

RE: how many servos for RCSkydiving
 
yeah you can allways come by.. we can help you..
www.rc-parachute.nl

dyl55 08-19-2008 11:46 PM

RE: how many servos for RCSkydiving
 
Ok. But this club it's away for me i'm living at the border of the France and Luxembourg in Arlon but if you have the mail of Jules i can take it and seek information, more its good if he speak french thanks

lundy 08-20-2008 01:38 AM

RE: how many servos for RCSkydiving
 
Hi dyl55 ,


My franc talking is not that good to have a conversation in technical how and why stuff , The guy U need to talk to is Theo Vaesen of TV produkts .
He is talking France in a descend way and is able to tel you everything you need to know about rc skydiving !

You can find him in the section Rc Locator -Find members - here on Rc Univers , you can contact him by personal mail ,Theo Vaesen

http://www.rcuniverse.com/community/...m?memid=150892

The reason way I don't put up his e-mail address over here in public is ,to avoid Spam .
( he is not in the need of Viagra and stuff like that , not yet :) I think ![sm=wink_smile.gif])

Good luck , Jules

dyl55 08-20-2008 10:27 AM

RE: how many servos for RCSkydiving
 
thanks very much

robert92679 08-20-2008 02:18 PM

RE: how many servos for RCSkydiving
 


ORIGINAL: ennyka

I use TWO recievers, one in the diver of coarse and one binded to the same model (Spektrum) in the plane for the drop box, and THREE servos Two in the diver and one on the Box.

What I have done is run an aileron extension from the RX in the jumper which connects to the servo in the drop box. The extension pokes out around the waist and I shaved the connector so it slips apart from the servo very easily when the jumper falls away. This way the jumper's TX/RX controls the drop, chute opening, and the arms. It also prevents a drop if you forget to turn the jumper on or there is some other radio problem.

I have a Futaba 9C TX and set up the channels for the drop and chute opening on the slider levers on the side of the TX. The left slider controls the drop, the right slider releases the chute.


dyl55 08-26-2008 09:25 AM

RE: how many servos for RCSkydiving
 
hi everybody i've not yet received my skydiver but i would like see the size of the micro skydiver of RCSkydiving.com for the person who have this, can you take a pictures with skydiver in your hand for see the size please ? thanks very much and sorry for the inconvenience

Ps: and if you have why not a video of skydiver in action ( just micro skydiver from RCSkydiving.com )
thank

dyl55 08-27-2008 08:47 AM

RE: how many servos for RCSkydiving
 
anybody ?


All times are GMT -8. The time now is 05:00 PM.


Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.