turbodremz23

My Feedback: (16)

I need a small measurement in MM from anyone that has an Ofna Hyper 7...actually a couple measurements..

The length of the center differential, drive cup to drive cup...

AND, the distance from the end of the clutch bell to the side of the gas tank...

I have a duratrax raze and am planning on the 2 speed conversion for the hyper 7, but want to be sure that the center diff measurements are the same as the Raze..

sfar785

i matched the dogbones up with my Hyper 7 and Raze, they're both the same for me

turbodremz23

My Feedback: (16)

hmm..so i'm guessing the 2 speed center diff would be a direct swap...mabey some minor modification..

sfar785

i'm pretty sure everything is interchangeable between the 2, they look like exact matches by just looking at them.

turbodremz23

My Feedback: (16)

i was just concerned about clearance, but i guess i will order it and see what happens...

thanks