RCU Forums

RCU Forums (http://www.rcuniverse.com/forum/)
-   RC 1/8th Scale Buggies (http://www.rcuniverse.com/forum/rc-1-8th-scale-buggies-244/)
-   -   Need help trying to ID this buggy!!!! (http://www.rcuniverse.com/forum/rc-1-8th-scale-buggies-244/11246493-need-help-trying-id-buggy.html)

RKoz920 09-30-2012 06:02 PM

Need help trying to ID this buggy!!!!
 
1 Attachment(s)
So I got this buggy and a red cat off a guy who doesnt know anything about them, I looked for a week, went to different websites and looked through models and instrucitons trying to figure it out with no luck, I pretty sure that it is an Ofna but can not confirm. So if anybody out there can help me out that would be awesome.

jonnytitelips 10-02-2012 10:14 AM

RE: Need help trying to ID this buggy!!!!
 
Could be an Ofna, or a losi maybe. Sorry i cant help much.

nastyboys727 10-02-2012 04:10 PM

RE: Need help trying to ID this buggy!!!!
 
looks like a mugen mbx5


RKoz920 10-02-2012 09:25 PM

RE: Need help trying to ID this buggy!!!!
 
So after a long and tring searching on the net, by some weird chance a picture popped up and low and behold, it was the buggy I have been searching for. turns out that it is a GS Racing Storm buggy very sure of it, and it was hard to find there web page to confrim it. so to those who stopped by and helped thank you very much.

MorganSS 10-04-2012 05:15 PM

RE: Need help trying to ID this buggy!!!!
 
doesnt look like a GS, and its def not a mbx5
maybe a mbx4?

RKoz920 10-05-2012 07:48 AM

RE: Need help trying to ID this buggy!!!!
 
1 Attachment(s)
I thought the same when i looked up the mbx5 then looked at mbx4 nope the 4 had a pivot ball suspension setup they did have a knuckle setup as well but the diff cases are different and the rear chasis brace mount was different still.

here is a pic of a gs storm I found



mkjohnston 10-06-2012 09:58 AM

RE: Need help trying to ID this buggy!!!!
 
Hi That looks alot like a Jammin X1-CR or X2 cr check out this link and look for the manual. http://www.jamminproducts.com/
Michael Johnston

SyCo_VeNoM 10-06-2012 01:00 PM

RE: Need help trying to ID this buggy!!!!
 
Quote:

ORIGINAL: mkjohnston

Hi That looks alot like a Jammin X1-CR or X2 cr check out this link and look for the manual. http://www.jamminproducts.com/
Michael Johnston
That's no jammin there ware way too many differences I own an X1 (X2 uses majority of the parts)

I would agree with the GS might be a slightly different model of it seeing the front brace looks a tad different but the rest looks spot on.


All times are GMT -8. The time now is 05:59 AM.