|
North Florida Rc Airboater's
Are there any Rc Airboater's in north Fl. these day's that would like to run together.
Lester Burch |
I'm about to build another soon. Not from north Florida , but I'm in central ... Getting my things together for the build. 76cc husky conversion
|
Jet!! Good to see you around! I have the building bug too - but I'm not in Florida at all. :)
|
Yeah ,it been a while ! But been pretty occupied with a lot of stuff so , getting that bug again ��
|
What's up guys ! I'm trying to get my stuff together to finish this build I started years ago. I hope I can stay on it this time. You guys build anything latley ?
|
I am building a 50cc Mudmasher Airboat now for a customer that lives in southwest Florida.
LB |
Lester , what's up man ? I sent you an email a while back. You still making prop hubs and such ? I'm trying to get this build going with a 76cc husky engine. I still have the 2 prop hubs you made me for the cy type engine. Maybe those will be next , but this chain saw engine keeps calling my name. I need to find a good way to start it that won't damage anything. I broke the crank shaft on the flywheel side.. Check your pms on here
|
I’m gonna build a scale Farman HydroGlisseur. (Water Taxi). There’s a thread about it on RCGroups in the Dock Talk forum. Been busy with the wife and kids and starting a new job. I need to get a build done and fix my other 7 boats. I’m gonna covert my Graupner arrow nitro mono to diesel. All sorts of stuff to do and no time to do it!!! |
Joe email a pic of your engine . I will look in to what it take to make prop hub.
Is the shaft end right hand or left hand thread. I have made some prop hubs for chainsaw engine before. |
https://cimg6.ibsrv.net/gimg/www.rcu...ed9c15dfad.jpg
https://cimg7.ibsrv.net/gimg/www.rcu...08a2ae8ed3.jpg https://cimg8.ibsrv.net/gimg/www.rcu...8b8ca6177c.jpg OPThanks sir ! Its left hand thread 10mmx1.5 LH this engine has some serious thump so its gonna need to be beefy I emailed the pics to you. Let.me know if you get them sir. |
Originally Posted by 1QwkSport2.5r
(Post 12539961)
I’m gonna build a scale Farman HydroGlisseur. (Water Taxi). There’s a thread about it on RCGroups in the Dock Talk forum. Been busy with the wife and kids and starting a new job. I need to get a build done and fix my other 7 boats. I’m gonna covert my Graupner arrow nitro mono to diesel. All sorts of stuff to do and no time to do it!!! |
Originally Posted by Lester Burch
(Post 12540010)
Joe email a pic of your engine . I will look in to what it take to make prop hub.
Is the shaft end right hand or left hand thread. I have made some prop hubs for chainsaw engine before. |
I did get pics i will haft see if i have that tap. I have made prop hubs chainsaw engines before. Wind it is time to make one i will need shaft size.
Right now it looks like it needs a good clean up. This thread has got off track. LB |
Originally Posted by Lester Burch
(Post 12541524)
I did get pics i will haft see if i have that tap. I have made prop hubs chainsaw engines before. Wind it is time to make one i will need shaft size.
Right now it looks like it needs a good clean up. This thread has got off track. LB |
| All times are GMT -8. The time now is 11:19 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.