torch1221

My Feedback: (3)

can anyone tell me what the factory settings are on the aqua jet, for break-in.

Ron Olson

My Feedback: (1)

The low speed shouldn't be messed with but if you did by chance, take it out to where it is even with the outer part of the throttle arm. The Owners manual says to start the high speed needle at about 3-1/2 turns out from the bottom.

torch1221

My Feedback: (3)

ok thanks. i bought the boat used. he said it only had a couple of tanks though it, and that i proppably needed to reset the neddles to the factory settings. but could not find what they where in the book.