New YPC Board Design 2014
Something new for 2014..:cool:...a new build with a few 'small tweaks'..pun intended.. :confused:
Follow the build at this link address: http://www.rcuniverse.com/forum/rc-b...l#post11768555 |
Finally BoardShark time
Bear,
It wont stop dumping SNOW here, its a ridiculous winter. I am ready for some summer, it would be great if the snow stays in the Mountains. I got around to working on this Shark...Yay I cut up a few plates of metal, and I also cut a big ugly hole in the deck of the board. https://farm8.staticflickr.com/7256/...0d03f848a3.jpg https://farm4.staticflickr.com/3719/...b0a5d1bbed.jpg https://farm4.staticflickr.com/3667/...b09c1100a0.jpg https://www.youtube.com/watch?v=aAGjh5D0OVY&list=HL1395842385&feature=mh_lolz |
Ronk- Looking Good !! If you run into any clearance problems you should be able to flip both servo arms and run the pushrod on the rail side.
You also want the arms to be parallel, and the pushrod to be at 90 degrees to the arm in the center position. |
4 Attachment(s)
Build Progress: http://www.rcuniverse.com/forum/rc-b...l#post11769535 link for more details of process.
http://www.rcuniverse.com/forum/atta...mentid=1981885 http://www.rcuniverse.com/forum/atta...mentid=1981884 http://www.rcuniverse.com/forum/atta...mentid=1981892 http://www.rcuniverse.com/forum/atta...mentid=1981893 |
The past few days of rain have dissipated and another stunning sunny day appeared at dawn !....missed the high tide by 2 hours this afternoon - surf a touch far out- difficult to 'sea - but - still managed to squeeze a few waves out of the session...(Sun + Fun + Family + Friends) = Great Life ...:cool: https://www.youtube.com/watch?v=QlRGhAvMaFA |
2 Attachment(s)
Build Progress: Bro rc Surfer Custom Boards link for more details of process.
http://www.rcuniverse.com/forum/atta...mentid=1982220 http://www.rcuniverse.com/forum/atta...mentid=1982219 |
ronkytonk
nice work on the shark. just in case you feel as though there is so much work and re-work to get it going, and maybe feel a bit snowed under, try this quick vid http://www.youtube.com/watch?v=Nv-OQm8d53Y |
Originally Posted by K-H2o
(Post 11769134)
Ronk- Looking Good !! If you run into any clearance problems you should be able to flip both servo arms and run the pushrod on the rail side.
You also want the arms to be parallel, and the pushrod to be at 90 degrees to the arm in the center position.
Originally Posted by bearcave
(Post 11770392)
ronkytonk
nice work on the shark. just in case you feel as though there is so much work and re-work to get it going, and maybe feel a bit snowed under, try this quick vid https://www.youtube.com/watch?v=E0vGdpukpRM I was thinking on giving my dude a GoPro head.. I think I am ready to clean my Shark up and seal it with epoxy and I should be ready to rock.. P.S. I love the SNOW!! |
1 Attachment(s)
Heres a pic of added weight . Stock steel was 157g. I ended up putting 258 g back with gorilla glue. I have a flex shaft combo heading my way . Does anyone have a pic of a leopard motor mounted .
|
YPC do you hard mount your figure? NM I saw your post about epoxing figure but what are the made of ? Something less solid as nqd Lisa ? I plan on hard mounting mine .
|
Originally Posted by Darkseacret
(Post 11770916)
YPC do you hard mount your figure? NM I saw your post about epoxing figure but what are the made of ? Something less solid as nqd Lisa ? I plan on hard mounting mine .
link showing Bro's make up and mounting process: http://www.rcuniverse.com/forum/rc-b...l#post11603215 |
3 Attachment(s)
|
1 Attachment(s)
A simple solution to sea-ing beyond the swell.....lol
http://www.rcuniverse.com/forum/atta...mentid=1982405 |
|
Sunday Arvi session .......:cool: Good demonstration of how changing the fin choice - changes the ride of the board to better suite the conditions....
<font size="3"> https://www.youtube.com/watch?v=efhAoqRyTaM |
4 Attachment(s)
Build Progress: for more detailed info. http://www.rcuniverse.com/forum/rc-b...l#post11772347
http://www.rcuniverse.com/forum/atta...mentid=1982967 http://www.rcuniverse.com/forum/atta...mentid=1982968 http://www.rcuniverse.com/forum/atta...mentid=1982969 http://www.rcuniverse.com/forum/atta...mentid=1982966 |
[h=2]Monday Arvi Session[/h]
Squeezed a few Amps out of a pack - between things...:cool: https://www.youtube.com/watch?v=7W3Ef7GlMB8 |
Nice videos YPC . Bro diffently kills it .
So after a sleepless night ive decided to keep the figure o- ring tethered and reinforce the lid and try to find some small wing nuts. |
2 Attachment(s)
New Build looking Good !....more detailed steps: http://www.rcuniverse.com/forum/rc-b...l#post11773181
http://www.rcuniverse.com/forum/atta...mentid=1983187 http://www.rcuniverse.com/forum/atta...mentid=1983186 |
Had 'another' sweet session this afternoon ....:cool: It's amazing what 20 minutes of rc Surfing can do for the mind - body and soul ...;) recommended daily !
https://www.youtube.com/watch?v=jNf_qU_An-M |
Ordered a Leopard 3650 2290kv 6d . With free jacket. . From OSE Still waiting on flex shaft set up to arrive before sealing decks .
|
Howzit Darkseacret.....good size of motor choice....waiting ?....not the part of life I care to enjoy ..lol
Speaking of which ...it dawned on me today ! that whilst I'm out having my afternoon fix / workout/session - surf permitting ! - some good folk are stuck in the traffic - patiently waiting to get home...:p Nick did some 'deep sea fishing'.....:cool: https://www.youtube.com/watch?v=dJE-8BdprNI |
Originally Posted by Darkseacret
(Post 11774011)
Ordered a Leopard 3650 2290kv 6d . With free jacket. . From OSE Still waiting on flex shaft set up to arrive before sealing decks .
|
Originally Posted by Darkseacret
(Post 11774460)
Is a 100 amp esc enough for this motor?
|
1 Attachment(s)
|
All times are GMT -8. The time now is 01:26 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.