rc10T wheels/tire combo
08-10-2003, 11:33 AM
#1
Senior Member
Thread Starter
Join Date: Jun 2002
Location: Plover,
WI
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
rc10T wheels/tire combo
My son recently recived an original RC10T from my brother. We are trying to get new tires for the rear. We bought new tires that were exactly the same as the old ones or so we thought. The problem is in the rims. The old rim tire combo was a 3-piece system that the LHS says is not made anymore. He sold us new rims (pin drive) that dont fit axles. The axles on our RC10T have a locating cone on the pin end. the beads on the new tires wont work with the old 3 piece rims (too thick). I hope someone can understand what I'm trying to describe and know of a rim that will work.
08-10-2003, 09:22 PM
#2
Senior Member
My Feedback: (10)
Join Date: May 2002
Location: greeleyCOLORADO
Posts: 760
Likes: 0
Received 0 Likes
on
0 Posts
rc10T wheels/tire combo
iv got an old rc10t,it has the pins but i did convert it to the mip universal axels in the rear,anyway for you to take a picture?
08-11-2003, 10:58 AM
#5
Senior Member
Join Date: Nov 2002
Location: Pass Lake,
ON, CANADA
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
rc10T wheels/tire combo
Tower Hobbies still shows these wheels on their site.
Part # 7800
This is a pair of ASSOCIATED rear wheels for the RC10T, RC10ST, and RC10GT
1/10th scale stadium trucks.
FEATURES: Made white nylon
Three piece construction
Dish style design
INCLUDES: Two rear rim assemblies
Eight 4-40 x 7/16" assembly screws
SPECS: Diameter: 2.2"
Width: 2"
REQUIRES: 2.2" truck tires.
These should also work.
Part# 7802
This is a pair of one-piece, lightweight rear truck wheels for any Associated
truck with 1/4" rear axles (NOT the RC10T2).
FEATURES:
Lightweight, one-piece "cone" style rims
Constructed of dyable white nylon
May use hot or cold dye to color these rims (Rit dye or we carry LiteSpeed)
INCLUDES: Two rims and instructions for mounting tires.
Part # 7800
This is a pair of ASSOCIATED rear wheels for the RC10T, RC10ST, and RC10GT
1/10th scale stadium trucks.
FEATURES: Made white nylon
Three piece construction
Dish style design
INCLUDES: Two rear rim assemblies
Eight 4-40 x 7/16" assembly screws
SPECS: Diameter: 2.2"
Width: 2"
REQUIRES: 2.2" truck tires.
These should also work.
Part# 7802
This is a pair of one-piece, lightweight rear truck wheels for any Associated
truck with 1/4" rear axles (NOT the RC10T2).
FEATURES:
Lightweight, one-piece "cone" style rims
Constructed of dyable white nylon
May use hot or cold dye to color these rims (Rit dye or we carry LiteSpeed)
INCLUDES: Two rims and instructions for mounting tires.
08-11-2003, 09:15 PM
#6
Senior Member
My Feedback: (10)
Join Date: May 2002
Location: greeleyCOLORADO
Posts: 760
Likes: 0
Received 0 Likes
on
0 Posts
rc10T wheels/tire combo
the 3 peice look exactly like what i have on mine,i did buy some losi wheels a few years back for it,lemme go to my shop this eve an take some pics so i can show you
08-12-2003, 11:30 PM
#7
Senior Member
My Feedback: (10)
Join Date: May 2002
Location: greeleyCOLORADO
Posts: 760
Likes: 0
Received 0 Likes
on
0 Posts
rc10T wheels/tire combo
sorry couldnt get pics but thats the same layout as mine and losi wheels fit, i think its 2.2 thats weird about the tower thing,what kinda wheels tires you looking for? i have a rear set of road hawgs for it,was going to let them go with it on ebay but if ya need em...,i would take the truck into the lhs and try some tires,course if you live in a rural area like me that wont work
