RCR Volcano EXP Pro
12-29-2013, 10:52 AM
#1
Junior Member
Thread Starter
Join Date: Dec 2013
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
RCR Volcano EXP Pro
I am running a NiMH 5000 mAh 8.4V battery in my new toy (RCR Volcano EXP Pro). it will run between 5 sec. and 2 min. then it shuts off, it goes into lock out and I have to go to the car, turn it off and back on. I have searched the manual for the proper way to change the controller from LiPO mode which is what I was told is the likely cause of this. there are no instructions in the manual on how to change the controller from LiPO mode to NiMH. anyone have a link or information on how to turn off LiPO mode ?
12-29-2013, 01:21 PM
#2
01-02-2014, 05:07 AM
#3
Senior Member
Ah, I know who you are now. 
Does it do it will all packs or just one. It's possible there is a issue with the connector. Bring them into the shop and we'll find it. BTW, your body is supposed to be here today.
Does it do it will all packs or just one. It's possible there is a issue with the connector. Bring them into the shop and we'll find it. BTW, your body is supposed to be here today.
