Redcat tornado
01-22-2019, 07:37 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2019
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Redcat tornado
I’ve got a redcat tornado bb. It was given to me by a friend. I’m working on getting it running now just waiting on my pull start to come in. I was messing with the remote to make sure the steering and gas worked. The throttle seems to work fine but the steering seems weak. Is there something I should change to help that?
01-23-2019, 04:06 PM
#4
It also could be the servo itself that's not up to par since the Tornado is used. Is the servo the stock Redcat/Hexfly servo? Depending on the model, the servo may only have 4 kg-cm of torque, and that depends on the voltage that is provided to the servo.
Check the servo saver thumb wheel and make sure it didn't loosen some how. You can loosen/tighten it to your liking. If it were me, I'd crank it down all the way (carefully, so as to not strip the threads).
Check the servo saver thumb wheel and make sure it didn't loosen some how. You can loosen/tighten it to your liking. If it were me, I'd crank it down all the way (carefully, so as to not strip the threads).
