HSP drift car project build
10-15-2019, 02:10 AM
#1
Junior Member
Thread Starter
Join Date: Oct 2019
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
HSP drift car project build
Hello everyone I have been in the RC hobby for 5 years thankyou for letting me post. I have currently got chassis part no. 03001. I have never had an RC drift car nor have I built a kit before. So this is a new project for me to try.
I want to do a build based on the flying fish kit. Already deciding to have a few aftermarket parts on there. I haven't bought any parts yet. But my question is can anyone find a part number picture of all the screws needed to mount everything from underneath the chassis? Thanks I already have a parts picture of the exploded view of the car
I want to do a build based on the flying fish kit. Already deciding to have a few aftermarket parts on there. I haven't bought any parts yet. But my question is can anyone find a part number picture of all the screws needed to mount everything from underneath the chassis? Thanks I already have a parts picture of the exploded view of the car
.
. Would it not be cheaper to buy a RTR drift car, and build off of that?
10-21-2019, 12:57 AM
#4
Junior Member
Thread Starter
Join Date: Oct 2019
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Hi I have found a HSP buggy roller chassis with no electronics on ebay it uses very similar parts to the drift car did some research and the only difference is the body post parts and shocks.
10-21-2019, 12:58 AM
#5
Junior Member
Thread Starter
Join Date: Oct 2019
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
might grab the parts off this and use them on the chassis I boughtthen change the shocks and body posts done!
