RCU Forums

RCU Forums (http://www.rcuniverse.com/forum/)
-   RC Car General Discussions (http://www.rcuniverse.com/forum/rc-car-general-discussions-179/)
-   -   - (http://www.rcuniverse.com/forum/rc-car-general-discussions-179/10957183-a.html)

sumocrawler88 02-13-2012 12:26 PM


<br type="_moz" /></div>

SyCo_VeNoM 02-13-2012 01:43 PM

RE: -
honestly reading the product description it would fry WAY before the motor even moved.
It's more like a Solder it yourself BEC to control servos, seeing it can only take in 2Amps of power. At most it can put out 1.5 amps at 12 volts which even 1/24th models pull.
And seeing its a voltage regulator it would only make the voltage constant (aka no speed control) so you might as well just use a switch ;)

Note here are the applications as stated on the site
Powering 5 V or 3.3 V systems from lower-voltage batteries
Powering 5 V subsystems (e.g. sensors) in lower-voltage (e.g. 3.3 V) systems
Achieving consistent actuator operation when powered by fluctuating batteries
Powering high-brightness LEDs or a large number of LEDs in series

All times are GMT -8. The time now is 02:14 PM.