Find Replacement Part - Spektrum S608
1 Attachment(s)
Hey Folks..
My Google'fu is usually pretty good I need some help. My son got a new RC car for his Birthday. It was bought by a family member out of province so going back to the shop is not an option.. Anyways, the steering started clicking in the servo after a few crashes. I pulled the servo out to order a replacement. Its Spektrum S608. Searching I cannot find reference to the S608 on Spektrum's website. I am guessing this is just one of the cheap servo's they sell in lower end cars maybe? Anyone know what a replacement for the S608 would be, maybe something with metal gears for a little more durability? http://www.rcuniverse.com/forum/atta...mentid=2209291 Thanks in advance folks! Mike |
...
|
Great question :-).... I am at work.. Lets see if I can find a picture.....
Pretty sure this is it: https://www.horizonhobby.com/1-10-am...n-p-ecx03028t2 1/10 AMP MT 2WD Monster Truck RTR, Black/Green |
Ok.. Thanks for pointing me towards the vehicle.. I should have thought of it before..
It's a S6170 according to this site.. https://www.amainhobbies.com/ecx-amp...3028t2/p464498 Am I safe ordering up a S6170 even though its an S608 in it? Is it worth finding a metal gear replacement for it rather then plastic? Thanks folks! |
Last post and I will wait for some feedback... I promise ;-)
Now I see there are replacement gearsets for the Servos (forgive my ignorance I am new at this). Any thoughts/guess if I order a replacement gear set for the S6170 if it will fit the S608 that I have? Can you replace plastic gears with metal? Or am I better of just driving an an hour or so to the city and visit a hobby shop and we can test out some options? Thanks! Mike |
There are plenty of servos out there that would fit the bill. Over the years, Hitec has been the "go to" servo brand for me... Hitec HS-625MG High-Speed 2BB Metal Gear Servo
If you want even better performance...Hitec HS-5625MG Digital High-Speed Metal Gear BB Servo |
Thanks Rusty...
That one is slightly smaller then the S6170..Not drastically so I guess it will fit fine. I think I may go hit up a couple hobby shops when I get a chance. It will be more money but nice to build up a relationship with someone in the area... Cheers, Mike |
...
|
I just replaced the cheapo one in my ECX Circuit. Wouldn't even turn the wheels at a full stop, and slow response. I replaced it with this. An Arrma ADS-7 V2 7KG Waterproof Servo.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEPYG Now the wheels turn at a dead stop and much faster response. It has dual ball bearings, metal gears and won't break the bank. Got mine from Ebay for 19.00, but if you can find a hobby store carrying Arrma vehicles you should be able to get one. May have to order it, but I know it will fit and work well. Very happy with mine so far. Bashed it pretty hard 2 weeks ago. It's on the bench for repairs, but the servo is fine. |
All times are GMT -8. The time now is 09:48 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.