Good pick for first car?
05-22-2012, 06:43 PM
#1
Junior Member
Thread Starter
Join Date: May 2012
Location: , BC, CANADA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Good pick for first car?
http://www.amazon.com/Drift-Mazda-RX.../dp/B000VXT26O
Good pick ? If not please post some other links to RTR drifters....
Good pick ? If not please post some other links to RTR drifters....
05-22-2012, 06:46 PM
#2
Junior Member
Thread Starter
Join Date: May 2012
Location: , BC, CANADA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
05-30-2012, 04:03 AM
#3
Junior Member
Join Date: May 2012
Location: Sheffield, UNITED KINGDOM
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
RE: Good pick for first car?
For a first car i wouldnt recommend an RTR ...
Best to get a Kit to build yourself, then if anything breaks you have some idea how to change the broken part.
Any Tamiya Kit is what I would recommend ... their build instructions are the best ... step by step and parts and spares are cheap and available in most model shops.
Check out
www.rcscrapyard.net/tamiya.htm
They have all the Tamiya models
Check the Chassis section ... if its a drift car you want look for the chassis type to end in D (ie TT-01D)
Hope this helps.
Best to get a Kit to build yourself, then if anything breaks you have some idea how to change the broken part.
Any Tamiya Kit is what I would recommend ... their build instructions are the best ... step by step and parts and spares are cheap and available in most model shops.
Check out
www.rcscrapyard.net/tamiya.htm
They have all the Tamiya models
Check the Chassis section ... if its a drift car you want look for the chassis type to end in D (ie TT-01D)
Hope this helps.
05-30-2012, 06:22 PM
#4
Senior Member
My Feedback: (4)
Join Date: Jul 2011
Location: San Clemente,
CA
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
RE: Good pick for first car?
His questions have already been answered to a certain extent:
http://www.rcuniverse.com/forum/m_11...m.htm#11091091
I recommended Tamiya as well.
http://www.rcuniverse.com/forum/m_11...m.htm#11091091
I recommended Tamiya as well.
