Savage xs Bearings problem
#1
Member
Thread Starter
Join Date: Dec 2012
Location: Patra-GR
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Savage xs Bearings problem
Hi guys.. i have the HPI SAVAGE XS FLUX i baught that before 2 weeks.. Soi have problem with a front bearings. they broke down! happened to someone that? what are better bearings for this car?
#2
My Feedback: (1)
RE: Savage xs Bearings problem
After only two weeks? What, you running the thing thru salt water and letting it sit unwashed ? Or you running at a skate park maybe? There's a guy been lurking around here who'd love to sell you some new ones. But I'm kinda surprised stockers would give out that fast. If you have been getting them wet, you should be taking them out and giving them a good lubing with some Sin Lube or Odonnel's dry wax bearing lube. Any decent shielded bearing should do. Boca or Acer. Standard rubber-shielded ones should do. No need to go ceramic unless yer racing. You might try cleaning them and lubing them again, they might just be dirty.
#3
Member
Thread Starter
Join Date: Dec 2012
Location: Patra-GR
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
RE: Savage xs Bearings problem
I've only played on grass in my yard and once in wet weather (little rain) i can't understend that!!because the bearings are damaged and axes. Please can somebody tell me the size of the bearings?
#4
My Feedback: (1)
RE: Savage xs Bearings problem
Um..."damaged and axes"??? Huh?
The bearing sizes should be listed in the owner's manual / parts list.
If ya run the car in wet conditions, a thorough drying, and a lubing of the bearings is a must. If there is PHYSICAL DAMAGE to the bearings, then there must be something you're not telling me.
The bearing sizes should be listed in the owner's manual / parts list.
If ya run the car in wet conditions, a thorough drying, and a lubing of the bearings is a must. If there is PHYSICAL DAMAGE to the bearings, then there must be something you're not telling me.
#6
RE: Savage xs Bearings problem
are u sure u havent had a big crash,
IMO, it looks like u have had a off centred front on crash, that was hard enough to pop the dog bone out of the axle bending it and the bearing
IMO, it looks like u have had a off centred front on crash, that was hard enough to pop the dog bone out of the axle bending it and the bearing
#7
Member
Thread Starter
Join Date: Dec 2012
Location: Patra-GR
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
RE: Savage xs Bearings problem
i never had a big crash ..I run it with a Tenergy battery 7.2V 6S 3800mAh NiMH ..it is not too fast ..I had heard some noise sometimes as Kruk Kruk but could not find what was.. and yesterday happened this..
#8
Senior Member
Join Date: Jan 2010
Location: Salinas (Wuxi, China),
CA
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
RE: Savage xs Bearings problem
Maybe someone accidentally stepped on it. ???
i don't know , and I'm not saying that's what it looks like.
But that would explain the mystery.
i don't know , and I'm not saying that's what it looks like.
But that would explain the mystery.
#10
RE: Savage xs Bearings problem
but if the bearing failed first how did the dammage happen to the axle and dog bone?
ave u got a plan to fix it?have u found the parts ok
ave u got a plan to fix it?have u found the parts ok
#11
Senior Member
Join Date: Jan 2010
Location: Salinas (Wuxi, China),
CA
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
RE: Savage xs Bearings problem
but if the bearing failed first how did the dammage happen to the axle and dog bone?
Could running the car on an axle that came bent from the factory, or was a factory defect... Could that have damaged the dogbone and destroyed the bearings?
Leonardo1982, are you sure the axle was ok after the car came out of the box?
#12
Member
Thread Starter
Join Date: Dec 2012
Location: Patra-GR
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
RE: Savage xs Bearings problem
yes i have ordered the parts from ebay..SO first of all i have only 2 month experience on rc cars..The only thing I noticed was when I got the car, the front tires. was not well centered and moving enought left and right easly..