Slash 2wd VXL onboard video
#1
Junior Member
Thread Starter
Join Date: Dec 2008
Location: Jacksonville, FL
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Slash 2wd VXL onboard video
Hi all, here's a project I have been working on. It's a slash 2wd with a mini cam from e-flight. It's not bad, but I'll get a better video camera with wider angle lens next time. I've posted this test run on youtube.
https://www.youtube.com/watch?v=vaBl8vseoDQ
https://www.youtube.com/watch?v=vaBl8vseoDQ
Last edited by skywarn37; 01-27-2014 at 10:43 PM.
#2
Junior Member
Thread Starter
Join Date: Dec 2008
Location: Jacksonville, FL
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
#4
Junior Member
Thread Starter
Join Date: Dec 2008
Location: Jacksonville, FL
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
#5
Junior Member
Thread Starter
Join Date: Dec 2008
Location: Jacksonville, FL
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Here's an update on my refitted Greene-Machine onboard camera stability test. I'm using a JVC addiction video camera. The original footage is 1080 full HD and is incredicble!
http://www.youtube.com/watch?v=BwnlQ...ature=youtu.be
http://www.youtube.com/watch?v=BwnlQ...ature=youtu.be
#8
Junior Member
Thread Starter
Join Date: Dec 2008
Location: Jacksonville, FL
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
I'm running a y-harness from the rx to a second servo inside the cabin. The camera is mounted on a swivel that is connect to a servo steering rod which is connected to futaba standard servo. So I'm running basically a dual steering rig except the second servo steers a camera. Once I go FPV(first person view), I will be controlling both the camera rotation and elevation separately from the steering in the near future I hope.
#9
Junior Member
Thread Starter
Join Date: Dec 2008
Location: Jacksonville, FL
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
It's not a slash anymore but it's the same guts. Here's my newest video http://www.youtube.com/watch?v=yS5ZG...zDYi_CeMqavrlg