Suspension Question
#1
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Feb 2011
Location: Garden City,
MI
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
Suspension Question
I have a Losi XXX-SCT and am looking at rear hubs and I see a bunch of different ones from 0-3 degrees...what does the degree pertain too? Is it toe or camber or what?
If it's toe as I suspect with my truck being 4 degrees stock toe in the rear stock would that add 0-3 degrees toe or subtract?
Thanks in advance.
If it's toe as I suspect with my truck being 4 degrees stock toe in the rear stock would that add 0-3 degrees toe or subtract?
Thanks in advance.
#3
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Feb 2011
Location: Garden City,
MI
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
RE: Suspension Question
ORIGINAL: The Mad Modder
Toe, camber is adjustable via the turnbuckle serving as the upper suspension arm.
Toe, camber is adjustable via the turnbuckle serving as the upper suspension arm.
I guess I need to find out if the stock hubs have any toe normally to find out what the 1 degree hubs will do to my rear toe. If they are 0 degrees I'm assuming adding the 1 degree aluminum hubs would put me at 5 degrees rear toe since it's 4 stock.