Novak High Voltage BL System
#1
Senior Member
Thread Starter
Join Date: Jun 2007
Location: simpson,
KS
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Novak High Voltage BL System
Does anyone know if this BL system will work in a TC4?
http://www2.towerhobbies.com/cgi-bin...?&I=LXNPK0&P=0
Any info on this system from personal experience will be greatly appreciated. Thank you in advance.
cody
http://www2.towerhobbies.com/cgi-bin...?&I=LXNPK0&P=0
Any info on this system from personal experience will be greatly appreciated. Thank you in advance.
cody
#3
RE: Novak High Voltage BL System
Someone here at this board uses the HV-Maxx in a TC4 FT running dual battery.. supposedly hit 70mph+..
But you probably kill the handling w/ that much weight on it..
Good straight line machine, I guess!!
If you want, you can make it work, but I don't see the reason for it... a Novak 3.5 or MM7700kv would probably be plenty fast enough.. (doing 45-50mph w/ 6-cell or 2S Lipo)
But you probably kill the handling w/ that much weight on it..
Good straight line machine, I guess!!
If you want, you can make it work, but I don't see the reason for it... a Novak 3.5 or MM7700kv would probably be plenty fast enough.. (doing 45-50mph w/ 6-cell or 2S Lipo)
#4
Senior Member
RE: Novak High Voltage BL System
Too big for a TC4 in my opinion. I've owned 3 of the systems, run them all in large trucks and MT Conversions.
Probably tear a TC4 apart with 14v of battery power!
Probably tear a TC4 apart with 14v of battery power!