Losi Speed-T fried esc
07-30-2009, 08:44 PM
#1
Member
Thread Starter
Join Date: Aug 2007
Location: Waldorf,
MD
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Losi Speed-T fried esc
I Recently toasted the stock ESC on my speed-T. I ordered a Novak GTB for a replacement without realizing the GTB only handles up to a 2s lipo. Anyone know what ESC I can use with a 3s lipo and the stock motor??? Prefer a novak product but I'll consider any quality ESC that meets or exceeds the stock unit. Also I would like to stick with the sensorless setup, unless I can connect a sensor to the stock motor.
07-30-2009, 11:47 PM
#5
Junior Member
Join Date: Jul 2009
Location: Lake Havasu, AZ
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
RE: Losi Speed-T fried esc
I fried my ESC after just two weeks. I sent it back to Losi and they replaced it free. They must realize they have some bad ones out there.
08-04-2009, 06:04 PM
#6
Member
Thread Starter
Join Date: Aug 2007
Location: Waldorf,
MD
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
RE: Losi Speed-T fried esc
Well, to be honest there was a little CA glue(oops) involved with the capacitor. So I'll go ahead and fork over $99 for the Havoc 3s esc(brushless). I plan to use my flycamone v2 to make some FPV videos for youtube and rcuvideos using my speed t. Thanks for all the input.
___________________________________
Growing old is inevitable, growing up is optional.
___________________________________
Growing old is inevitable, growing up is optional.
