HPI Cuda body on TC4 chassis?
01-14-2013, 08:06 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2013
Location: Van MeterIA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
HPI Cuda body on TC4 chassis?
Hey guys, I was wondering if someone can help me.
I am looking to get a cuda body from HPI.On their site it mentions need to have the offset 6MM wheels for a 190mm chassis. On their chassis they use 6mm on rear and 0 offset on fronts.Would it be front and rear offset 6mm on a TC4?
I don't have a TC4 chasis, I just want the best chassis that I can get for the car. Money is no issue. I just don't want something super low to the ground, as its gotta make the car look realistic.
Any suggestions?
Thanks for any help
01-17-2013, 07:12 PM
#2
Member
Join Date: Feb 2012
Location: CHICAGO,
IL
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
RE: HPI Cuda body on TC4 chassis?
6mm on the rear & 0mm on the fronts =
The Cuda, like most "VINTAGE" pony cars by HPI have a wider rear =
6mm offset
If you're going for realistic then use the "VINTAGE" tires and "VINTAGE" wheels by HPI
The Cuda, like most "VINTAGE" pony cars by HPI have a wider rear =
6mm offset
If you're going for realistic then use the "VINTAGE" tires and "VINTAGE" wheels by HPI
ORIGINAL: conceptmachine
Hey guys, I was wondering if someone can help me.
I am looking to get a cuda body from HPI.On their site it mentions need to have the offset 6MM wheels for a 190mm chassis. On their chassis they use 6mm on rear and 0 offset on fronts.Would it be front and rear offset 6mm on a TC4?
I don't have a TC4 chasis, I just want the best chassis that I can get for the car. Money is no issue. I just don't want something super low to the ground, as its gotta make the car look realistic.
Any suggestions?
Thanks for any help
Hey guys, I was wondering if someone can help me.
I am looking to get a cuda body from HPI.On their site it mentions need to have the offset 6MM wheels for a 190mm chassis. On their chassis they use 6mm on rear and 0 offset on fronts.Would it be front and rear offset 6mm on a TC4?
I don't have a TC4 chasis, I just want the best chassis that I can get for the car. Money is no issue. I just don't want something super low to the ground, as its gotta make the car look realistic.
Any suggestions?
Thanks for any help
01-17-2013, 08:20 PM
#3
Junior Member
Thread Starter
Join Date: Jan 2013
Location: Van MeterIA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
RE: HPI Cuda body on TC4 chassis?
Squirrel, thanks for the reply. Yes, for sue the vintage look. Got it coming and looking forward to getting it painted up!
