1/10 RC Formula 1 Cars...lets see'em
12-30-2013, 08:12 AM
#901
Senior Member
My Feedback: (5)
Join Date: Dec 2008
Location: Chesapeake,
VA
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Ok, so I made the plunge into F1 as it just seems more fun. Question I have is where can I find a new body shell for the car? I picked up a very modified Formula Ten chassis which has mounting locations for either HPI or F104 bodies, So I am looking for something to fit. Have been playing with a 25T and a 3800Kv system, both are fun but I think the brushless will be the one to eventually end up in this chassis, it's just too much fun.
12-30-2013, 10:12 AM
#902
Member
Join Date: Dec 2010
Location: Oswego,
IL
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
12-30-2013, 02:38 PM
#905
Senior Member
Thread Starter
Join Date: Jun 2006
Location: Jackson, MS
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
@Orcatkt, I saw that you're looking for an Williams FW16 body. You're in luck, there's a company that makes one those. It's actually a very nice looking body with good detail. The only problem I saw with it is it doesn't have molded cut lines for the front A-arms. I ordered one a couple of years back, just haven't painted it up yet.
Here's a link to their website. The body is named 94W.
http://www.rc-trg.com/trg-body.html
Here's a link for the sticker sheet, but you'll have to paint the red and gold trim. This is at TQ.
http://www.tqrcracing.com/shop/produ....asp?p_id=7087
Good luck with it.
Here's a link to their website. The body is named 94W.
http://www.rc-trg.com/trg-body.html
Here's a link for the sticker sheet, but you'll have to paint the red and gold trim. This is at TQ.
http://www.tqrcracing.com/shop/produ....asp?p_id=7087
Good luck with it.
Last edited by Vyger; 12-30-2013 at 03:01 PM.
12-30-2013, 08:11 PM
#906
Senior Member
My Feedback: (5)
Join Date: Dec 2008
Location: Chesapeake,
VA
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Cool, seems that the manufacturer's dimensions show the Formula 10 having a 283mm wheelbase while the F104 has a 270mm, will that be too much of a difference? It might seem odd, but I want it to have a scale feel. Off to scout those links now! Thanks for the help.
01-06-2014, 10:48 AM
#908
Senior Member
Thread Starter
Join Date: Jun 2006
Location: Jackson, MS
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
The Tamiya F104 (like the Ferrari F60) and HPI Formula 10 car are based on a more modern F1 design, longer and narrower. The Tamiya F104W is a wider car that used a different front and rear end (from the Tamiya F103). IMO, I think you’d want to use the W type car for a more scale appearance.
However, if you plan on running/racing the car at your local club you may not be able to based on some of the rules that only allow 190mm maximum width. You should check with them before hand if you plan to race it.
I hope this helps
However, if you plan on running/racing the car at your local club you may not be able to based on some of the rules that only allow 190mm maximum width. You should check with them before hand if you plan to race it.
I hope this helps
03-28-2014, 12:43 PM
#909
Senior Member
Thread Starter
Join Date: Jun 2006
Location: Jackson, MS
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
Tamiya TCS Sale in Aliso Viejo
Hey guys,
I just thought I'd share some information I found out about. It looks like Tamiya is having a sale at the TCS race this weekend. I've attached a flyer but if you can't read it this is what's going on.
It's a one day only sale, Sunday, March 30th from 10:00am to 4:00pm. It's at their track in Aliso Viejo, 4 Orion Aliso Viejo, CA 92656. They will be selling limited R/C kits, Hop-up options, body sets, and special items.
I know they had some really good deals the last time they did this. I missed out last time but I wont do that again.
I just thought I'd share some information I found out about. It looks like Tamiya is having a sale at the TCS race this weekend. I've attached a flyer but if you can't read it this is what's going on.
It's a one day only sale, Sunday, March 30th from 10:00am to 4:00pm. It's at their track in Aliso Viejo, 4 Orion Aliso Viejo, CA 92656. They will be selling limited R/C kits, Hop-up options, body sets, and special items.
I know they had some really good deals the last time they did this. I missed out last time but I wont do that again.
04-05-2014, 06:45 AM
#911
Member
Hi, Just completed another F1 car. Lewis Hamilton's Mclaren MP4-24 with a n F60 body. This is my favorite F1 car
of all I have. Regards
Norman2
of all I have. Regards
Norman2
Last edited by Norman2; 04-06-2014 at 05:36 AM.
04-08-2014, 03:38 AM
#913
Member
can race 200mm F1 and LM1 so i just change wheels and front bumper . See photo attached. Regards
Norman
Last edited by Norman2; 04-08-2014 at 03:41 AM.
08-30-2014, 01:42 PM
#914
Junior Member
Join Date: Aug 2014
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Recently finished the 3racing fgx F1 car and boy it is such a beautiful looking RC.
https://www.youtube.com/watch?v=MEfW02wuY8Q
https://www.youtube.com/watch?v=MEfW02wuY8Q
09-27-2014, 07:44 AM
#917
Member
Mercedes Benz F1 W05
Hi, Was able to get a W05 body from Hong Kong. Although not the same quality as Tamiya it is the only one available for the W05.
Enjoy and regards
Norman2
Enjoy and regards
Norman2
02-15-2015, 08:08 AM
#919
Senior Member
My Feedback: (5)
Join Date: Dec 2008
Location: Chesapeake,
VA
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Quick pic of my bashing shell for practice. Need to find somewhere on the East Coast that races these properly. Excuse the bash buggy in the background, I run that with my boys.
02-16-2015, 05:09 AM
#920
Member
Ok, so I made the plunge into F1 as it just seems more fun. Question I have is where can I find a new body shell for the car? I picked up a very modified Formula Ten chassis which has mounting locations for either HPI or F104 bodies, So I am looking for something to fit. Have been playing with a 25T and a 3800Kv system, both are fun but I think the brushless will be the one to eventually end up in this chassis, it's just too much fun.
Regards
Norman2
Last edited by Norman2; 02-16-2015 at 05:14 AM.
02-17-2015, 07:57 AM
#921
Senior Member
My Feedback: (5)
Join Date: Dec 2008
Location: Chesapeake,
VA
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone race out the East Coast US? I am in South VA and looking to start racing F1. I will probably look at 1/10 on road as well, but the F1 is what appeals most. Happy to travel if it is good people and a good time!
Basic idea of what is being run would be helpful too so I can turn up with a legal car lol! Anyway, shout out, I am finding the F1 is more fun than the buggies and SC stuff was. Plus it feeds my need for highly complex items that go very very fast.
Basic idea of what is being run would be helpful too so I can turn up with a legal car lol! Anyway, shout out, I am finding the F1 is more fun than the buggies and SC stuff was. Plus it feeds my need for highly complex items that go very very fast.
02-20-2015, 02:05 PM
#922
Junior Member
Join Date: Mar 2014
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
The Rug at King R/C, which is in the Winston-Salem, NC area, races F1. We use an UF1 format. They have a Facebook page that lists the schedule. A group of us will be there to race on-road on the 28th. The usually have USVTA, USGT, 17.5 TC, 1/12th (13.5 and/or 17.5), F1, and maybe more.
I am rarely on RCUniverse, but I have this same logon on RCTech.net.
Scott
I am rarely on RCUniverse, but I have this same logon on RCTech.net.
Scott
07-24-2015, 11:24 PM
#923
Junior Member
Join Date: Dec 2008
Location: MelbourneVictoria, AUSTRALIA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
To celebrate our 3rd anniversary as the most read RC F1 website we've added a lot of new content and updated many of the most popular pages.
www.rcformula1.com.au
Thanks to all of our readers who have sent in positive feedback on the update.
www.rcformula1.com.au
Thanks to all of our readers who have sent in positive feedback on the update.
02-05-2016, 02:26 PM
#925
Junior Member
Join Date: Feb 2016
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Hi All,
I'm loving this thread, and have just made the used plunge with a couple of unknown rolling chassis that were available for a price that made it far too tempting to resist (free!). My problem is that I don't know the make/model of either of them so I can get started fitting them out to my liking. I'm hoping the collective wisdom here can help out. Please take a look and let me know if you have some idea what there are:
Also, I've only run stadium and short course trucks so far, so if anyone wanted to offer up suggestions for ESC/Motor combos that would be appropriate for a street racing beginner, I would be most appreciative. Note that I'm strictly NiMH for now due to budget, and I'm not looking for a setup that could pass my Mazda on the freeway.
Thanks everyone!
I'm loving this thread, and have just made the used plunge with a couple of unknown rolling chassis that were available for a price that made it far too tempting to resist (free!). My problem is that I don't know the make/model of either of them so I can get started fitting them out to my liking. I'm hoping the collective wisdom here can help out. Please take a look and let me know if you have some idea what there are:
Also, I've only run stadium and short course trucks so far, so if anyone wanted to offer up suggestions for ESC/Motor combos that would be appropriate for a street racing beginner, I would be most appreciative. Note that I'm strictly NiMH for now due to budget, and I'm not looking for a setup that could pass my Mazda on the freeway.
Thanks everyone!