Motonica P81 1/8 cnc conversion
 

Hi guys,

I have a Motonica P81 RS that I converted to brushless.

It's been an hard work. This is my set up:

Motor Tekin 2650 kv

Batteries: 4s 6000mah or 6s 4200mah shorty

Frame: Black glass fiber 5mm (I previously built a cnc machine) and purple anodized belt tensioner

I hope you like it !!! I all made myself so please be gentle !!!

Regards, Federico

RE: Motonica P81 1/8 cnc conversion
 

Very nice, How fast?

RE: Motonica P81 1/8 cnc conversion
 

Very. I've seen one of these go and I was totally blown away. Apart from the sheer power to weight ratio which is just insane, the corner speed is also mind-blowing. These cars are like F1 crs in that respect, there's actually a speed UNDER which you cannot enter a corner, as you require forward motion to generate downforce.

RE: Motonica P81 1/8 cnc conversion
 

I think it will be in the high 70s.
I hope handling to be better than original having batteries in the middle.

I still have to try it. I hope next week, still some work to do.