Need help selecting 1:10 scale chassis.
I want to build a specific RC car. The only body I could find was from Delta Plastics. It’s a 1/10 scale 1965 Shelby Daytona coupe. The wheel base is 260 mm. Is this a common size? Can anyone recommend a rolling chassis w a 260mm wheelbase. I don’t race, I just like the 65 Daytona coupe so less expensive is better. thank you Thomas Davis |
Are you talking about this body here:
https://deltaplastikusa.com/products...0783c381&_ss=r They clearly state that it fits any 1/8 buggy: https://cimg3.ibsrv.net/gimg/www.rcu...7ab337c60f.jpg one of the least expensive cars that I can find available right now which is compatible would be this: https://www.redcatracing.com/Blackou...category=18367 Only problem is that it comes with SCT wheels and you might want to get a GT8 just so that it looks more scale... if it were me I'd get this: https://www.nitrorcx.com/52c76-maddr...ss-limite.html |
I should have included a link. Here is the body I purchased.
Originally Posted by bill_delong
(Post 12559876)
Are you talking about this body here:
https://deltaplastikusa.com/products...0783c381&_ss=r They clearly state that it fits any 1/8 buggy: https://cimg3.ibsrv.net/gimg/www.rcu...7ab337c60f.jpg one of the least expensive cars that I can find available right now which is compatible would be this: https://www.redcatracing.com/Blackou...category=18367 Only problem is that it comes with SCT wheels and you might want to get a GT8 just so that it looks more scale... if it were me I'd get this: https://www.nitrorcx.com/52c76-maddr...ss-limite.html https://deltaplastikusa.com/products/b3-shelby-cobra-gt |
This is the item description.
Originally Posted by gluedup
(Post 12559824)
I want to build a specific RC car. The only body I could find was from Delta Plastics. It’s a 1/10 scale 1965 Shelby Daytona coupe. The wheel base is 260 mm. Is this a common size? Can anyone recommend a rolling chassis w a 260mm wheelbase. I don’t race, I just like the 65 Daytona coupe so less expensive is better. thank you Thomas Davis if anyone could recommend an RC car chassis that will fit I’d be grateful. Regards Thomas Davis |
This should be close enough in size to meet your needs:
https://www.nitrorcx.com/51c802-firered-24ghz.html |
All times are GMT -8. The time now is 02:32 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.