Power Racing 1/5 MT 4x4 (pictures)
#104
Senior Member
Join Date: Nov 2004
Location: , MO
Posts: 551
Likes: 0
Received 0 Likes
on
0 Posts
RE: Power Racing 1/5 MT 4x4 (pictures)
i emailed ace hobbys and some place called larry's. ace emailed me back saying they didn't have a retail price so i couldn't pre order one. i doubt larry's will respond.
#105
Junior Member
Join Date: Jun 2004
Location: OlindaVictoria, AUSTRALIA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
RE: Power Racing 1/5 MT 4x4 (pictures)
ORIGINAL: wagnerov
Hello,
The price tag is pretty much set, you can trust us on that. Sometimes it's nice being a small company.
I will definitely be getting some video and better pictures of the truck when I get to drive it in Taiwan later this month or early Dec...I want to see if i can flip it over a jump! As far as the steering servos go, they will probably be rotated 180 degrees and placed closer to the center of the chassis. As soon as I saw that on the prototype, I knew that needed to be changed. The throttle/brake servo is located next to the engine. In the next few weeks I am willing to bet that that the truck will look a bit different than what is seen here, but the basic important features will remain the same.
Distributor inquiries are welcome from around the world. Power Racing will be selling the car in the U.S. to hobby shops.
Thanks,
-Cameron
Hello,
The price tag is pretty much set, you can trust us on that. Sometimes it's nice being a small company.
I will definitely be getting some video and better pictures of the truck when I get to drive it in Taiwan later this month or early Dec...I want to see if i can flip it over a jump! As far as the steering servos go, they will probably be rotated 180 degrees and placed closer to the center of the chassis. As soon as I saw that on the prototype, I knew that needed to be changed. The throttle/brake servo is located next to the engine. In the next few weeks I am willing to bet that that the truck will look a bit different than what is seen here, but the basic important features will remain the same.
Distributor inquiries are welcome from around the world. Power Racing will be selling the car in the U.S. to hobby shops.
Thanks,
-Cameron
#106
Senior Member
Join Date: Nov 2004
Location: Fullerton,
CA
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
RE: Power Racing 1/5 MT 4x4 (pictures)
I live in SoCal .LA area. I cannot find any racing for off road large scale. KZ does on road ....any off road in the US?
I am know confused about the PL...I am not sure it will have a center diff...oh well we will have to wait and see.
I am know confused about the PL...I am not sure it will have a center diff...oh well we will have to wait and see.
#107
Junior Member
Join Date: Apr 2004
Location: Sunnyvale, CA
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
RE: Power Racing 1/5 MT 4x4 (pictures)
The truck will have a spool for the center drive arrangement, read: locked. A diff and/or two-speed tranny will be optional equipment. I guess there is a lot of new stuff for the truck but no one has taken any pictures for us yet.
Thanks,
-Cameron
Thanks,
-Cameron
#109
Member
Join Date: Aug 2005
Location: , CA
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
RE: Power Racing 1/5 MT 4x4 (pictures)
I just threw my Power Racing Katana buggy in the trash. The parts are S*** don't be whoo'd by the cheap price. All of you know you get what you pay for.
#111
Senior Member
Join Date: Dec 2002
Location: Tel Aviv, ISRAEL
Posts: 900
Likes: 0
Received 0 Likes
on
0 Posts
RE: Power Racing 1/5 MT 4x4 (pictures)
I saw today the new MCD 4X4 Monster in Israel, what a monster !!!!
This thing is huge, the power of the 26cc is great and this monster is pretty fast.
I will meet with the owner at friday to bash together with my Traveller and another friend with his Yankee 1/4, I will try to get some good photos.
This thing is huge, the power of the 26cc is great and this monster is pretty fast.
I will meet with the owner at friday to bash together with my Traveller and another friend with his Yankee 1/4, I will try to get some good photos.
#114
Banned
Join Date: Oct 2005
Location: Mackenzie, BC, CANADA
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
RE: Power Racing 1/5 MT 4x4 (pictures)
Yeah probably, I want to see an 8 shock design, composite shock towers, smoothed out angles on all parts, and a roll bar to tie the 2 side plates together in the middle, over the engine.
#115
Senior Member
Join Date: Aug 2005
Location: Stockholm, SWEDEN
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
RE: Power Racing 1/5 MT 4x4 (pictures)
is this just me.. but it feels like it got some risk getting bent in the middle.. hope they make those side things really hard
i like the chassi on the Marder.. bent on the sides.. and the same chassi is used on other stuff 2 ofcourse
all hail the rollcage:P would be nice..
i like the chassi on the Marder.. bent on the sides.. and the same chassi is used on other stuff 2 ofcourse
all hail the rollcage:P would be nice..
#116
Banned
Join Date: Oct 2005
Location: Mackenzie, BC, CANADA
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
RE: Power Racing 1/5 MT 4x4 (pictures)
I have a plasma cutter, so if the side plates or chassis are prone to bending I will make myself some new ones out of 4mm stainless steel. Heavy, but effective. Also shock towers in 4mm stainless would work great too.[8D]
#118
Junior Member
Join Date: Jun 2004
Location: OlindaVictoria, AUSTRALIA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
RE: Power Racing 1/5 MT 4x4 (pictures)
OK Cameron, we are still waiting for some more news.... any sign on the horizon yet?
ORIGINAL: wagnerov
The truck will have a spool for the center drive arrangement, read: locked. A diff and/or two-speed tranny will be optional equipment. I guess there is a lot of new stuff for the truck but no one has taken any pictures for us yet.
Thanks,
-Cameron
The truck will have a spool for the center drive arrangement, read: locked. A diff and/or two-speed tranny will be optional equipment. I guess there is a lot of new stuff for the truck but no one has taken any pictures for us yet.
Thanks,
-Cameron
#120
Junior Member
Join Date: Apr 2004
Location: Sunnyvale, CA
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
RE: Power Racing 1/5 MT 4x4 (pictures)
It's not dead. They're just testing it in Taiwan and not taking pictures for some reason. As soon as I have one in my hands to test, or we get pictures, RCU will be the first place to see them.
Thanks,
-Cameron
Thanks,
-Cameron
#124
Senior Member
Join Date: Apr 2005
Location: Calgary,
AB, CANADA
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
RE: Power Racing 1/5 MT 4x4 (pictures)
So what's that now? Like over 3 months from the original "hype", and not even a murmor of progress? Heck their website doesn't even show anything other then their original pic/info.
BOO!
BOO!
#125
Senior Member
Join Date: Aug 2005
Location: , SWEDEN
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
RE: Power Racing 1/5 MT 4x4 (pictures)
I guess they are trying to figure out how to keep all that cheap molded plastic from breaking all the time, and how to get the car under a thousand dollars RTR (which I don´t think is going to happen)