large scale engine with small scale tranny help please.
04-29-2006, 05:19 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2006
Location: Rapid City ,
SD
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
large scale engine with small scale tranny help please.
Please no flaming...lol.
I am building a large scale realistic looking 4x4 truck.I will be using a set of 8.5 inch tall IMEX swamp dawg tires with mostly T MAXX drivetrain.I will use the MAXX trans and wanted to know HOW i could mate one of these GAS 2 stroke engines like a Zenoah or somethin clutch bell gears to a MAXX tranny spurr gear? I MUST use the MAXX tranny so I need a way to adapt the engine to it.
I know verry little about these engine in there RC form and would really apperciate the help.
Thanks....Will.
I am building a large scale realistic looking 4x4 truck.I will be using a set of 8.5 inch tall IMEX swamp dawg tires with mostly T MAXX drivetrain.I will use the MAXX trans and wanted to know HOW i could mate one of these GAS 2 stroke engines like a Zenoah or somethin clutch bell gears to a MAXX tranny spurr gear? I MUST use the MAXX tranny so I need a way to adapt the engine to it.
I know verry little about these engine in there RC form and would really apperciate the help.
Thanks....Will.
04-29-2006, 09:05 PM
#3
Junior Member
Thread Starter
Join Date: Apr 2006
Location: Rapid City ,
SD
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
RE: large scale engine with small scale tranny help please.
Thanks I found it and read it but didnt read anything that siad HOW he connected the engine to the MAXX tranny.I got the thread started again so maybe I will get some answers.
Thanks.
Thanks.
04-29-2006, 09:17 PM
#4
Junior Member
Join Date: Apr 2006
Location: La Mesa,
CA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
RE: large scale engine with small scale tranny help please.
Heres a thread that may help, its his other gas maxx, including close-up pictures of how he attached the engine to the transmission.
[link]http://www.rcuniverse.com/forum/fb.asp?m=2893529[/link]
[link]http://www.rcuniverse.com/forum/fb.asp?m=2893529[/link]
