lbsickboy

hi bigscalebasher
nice wheels+rubbers where do they come from thanks

nutechracingusa

Hi Rusian
The 4wd kits are in stock and ready to ship http://www.fsracingusa.com/fs4wdconversionkit.aspx let me know if you have any questions.

Thank You,
Scott
FS Racing USA

rusian

hi master Scott,
i just send the email, did you receive ?
tel me.

nutechracingusa

Yes I received you email and responded back to you this morning, let me know if you have any questions.

Thank You,
Scott
FS Racing USA

bbeverlie

Hey guys I put a set of HPI (P/N HPI86479) axel boot on my King Kong to see if they will work and keep crap out,

nutechracingusa

Looks nice those should help alot as far as keep garbage out and help keep the cups and shafts from vibrating as much and help them last longer

Nice Mod !!!

Scott
FS Racing USA

bbeverlie

I used some wheel bearing grease on the cups and shafts to help with ware and vibration! I've ordered another set to do the back axels!

FS*MT*4WD

use tie wraps to keep em in place, i teared up a few before i realised that, small tie wraps works best at least on the shaft..
use them on your center carriers too..

bbeverlie

Will do! I'll do the center shaft's once I pull the motor for whatever reason, And also the mod to add grease to the center diff! This thread has lost of good info, Thanks...

asphaltcowboy

Hello, my friend get his FS "MARS" - Hummer today in Germany.

It´s heavy [8D]

Realy 35ccm Engine !!!

Much things are new - see Pictures :

asphaltcowboy

Another friend of me makes CNC machined alloy parts for FS Car´s :

FS*MT*4WD

nice one asphalt, try to get some video of that beast in action!!

FS*MT*4WD

a few minutes with a hacksaw and blowtorch and i got me some sideguards,used chopping board...sloppy job but works lol..

[img][/img]

[img][/img]

mbe301

Easy to clean up the edges with a dremel. Nice idea

bentley marshall

heres some flaps i made for my fs truck

bbeverlie

Question, Why are you guys making them vs. buying the FS clear sheilds?? Is it the cost, quality or the fact that the stock covers don't keep enough crap out??

rckiwi

That 1/2 the fun with these LS cars! making things for them

bbeverlie

Don't get me wrong I'm all for mods but usually to make something better! I get my fun bashing[>:]

bigscalebasher

RCone blue coiled fuel line guards! and more tires&rims. i call`em moon rakers from a friend of a friend

asphaltcowboy

Where to buy, these tires&rims ???

Greetings Maik

rckiwi

Yeah I am liking them! are they 18mm square or Hex drive and you have adapters? Will HPI tyres fit? Where can we buy them from????

FS*MT*4WD

the stock plastic ones are poor quality and they crack at the mounting points, besides why buy it when ya can make it..
the MCD sidecovers look real nice, and they are made from lexan so they should hold up good, im gonna get a MCD mt body and those sideguards next...first need to rob a bank quickly..

rckiwi

I guess bashing is all good fun! but I like to make my cars better and if I can do that without buying off the shelf stuff then I will, thats what makes Large Scale better than the rest, is easier to make stuff for them!

bbeverlie

Speaking of the side covers, How the heck do you get the right side (2) nuts off that are obstructed by the drive gear shield?? I was thinking I may have to heat and bend one of my spin tight's (spin tight=screw diver with hex end)...

FS*MT*4WD

get a long nose pliers and try hook it, thats another reason the stock ones are rubbish..even the mount at the gas tank is a headache..