my current project: Hotrod 1:3,5 with pocked Quad engine
06-29-2010, 06:33 AM
#26
Member
Thread Starter
Join Date: May 2010
Location: karlsruhe, GERMANY
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
RE: my current project: Hotrod 1:3,5 with pocked Quad engine
Thank you!! Yes the wedding took me too much time,so now it's done and let's go back to work. Yes, unfortunately I have to wait to get the walbro carb to see the clearance for the center mounted mountain bike shock or some FG shocks on a bracket. This frame is my first and I guess the only one made like this. But without fenders the front end is visible that's why i've made it like this way to match as close as posible on the real one. Next frame must be a daily driver 
.With the engine mount in the rear of the car ,there is plenty of space left due of the scale. So for this car I should make a scale interior. The tonegawa Servo is placed behind the fake engine under the fake tranny.I've just weld the brackets a couple minutes ago during the putty on the body is hardening. Ok after a good german beer (
) I will continue!!
Pascal
.With the engine mount in the rear of the car ,there is plenty of space left due of the scale. So for this car I should make a scale interior. The tonegawa Servo is placed behind the fake engine under the fake tranny.I've just weld the brackets a couple minutes ago during the putty on the body is hardening. Ok after a good german beer () I will continue!!Pascal
07-03-2010, 05:52 PM
#30
Senior Member
Join Date: Apr 2007
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
RE: my current project: Hotrod 1:3,5 with pocked Quad engine
That is one cool ride.
If you want to kill off some rotating mass, drill out the extra meat from the sprokets to lighten them up. I had 20T industrial sprocket weighed 140 grams, after machining it's 54 grams.
If you want to kill off some rotating mass, drill out the extra meat from the sprokets to lighten them up. I had 20T industrial sprocket weighed 140 grams, after machining it's 54 grams.
12-23-2010, 11:18 AM
#32
Member
Thread Starter
Join Date: May 2010
Location: karlsruhe, GERMANY
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
RE: my current project: Hotrod 1:3,5 with pocked Quad engine
Update available soon (01.01.2011) on Facebook :Ford 1932 3 Windows 1:3,5 scale Project
http://www.facebook.com/pages/Ford-1932-3-Windows-Hotrod-135-scale-RC-Project#!/pages/Ford-1932-3-Windows-Hotrod-135-scale-RC-Project/128373623894141?v=wall
merry Chrismas and happy new year !!
Ford 1932 3 Windows 1:3,5 scale Project
http://www.facebook.com/pages/Ford-1932-3-Windows-Hotrod-135-scale-RC-Project#!/pages/Ford-1932-3-Windows-Hotrod-135-scale-RC-Project/128373623894141?v=wallmerry Chrismas and happy new year !!
12-25-2010, 01:58 AM
#33
Member
Thread Starter
Join Date: May 2010
Location: karlsruhe, GERMANY
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
RE: my current project: Hotrod 1:3,5 with pocked Quad engine
Of course I will update my work here but I'll try to put at least one pic a day on : http://www.facebook.com/pages/Ford-1...3894141?v=wall
MERRYCHRISMAS!!
MERRYCHRISMAS!!
12-26-2010, 12:06 AM
#35
Senior Member
Join Date: Apr 2007
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
RE: my current project: Hotrod 1:3,5 with pocked Quad engine
ORIGINAL: fibergless
Of course I will update my work here but I'll try to put at least one pic a day on : http://www.facebook.com/pages/Ford-1...3894141?v=wall
MERRY CHRISMAS!!
Of course I will update my work here but I'll try to put at least one pic a day on : http://www.facebook.com/pages/Ford-1...3894141?v=wall
MERRY CHRISMAS!!
Hi,
I just noticed this also posted on the HAMB
cool car, looking good so far.
12-26-2010, 02:00 AM
#36
Senior Member
My Feedback: (4)
Join Date: Feb 2005
Location: Ellensburg, WA
Posts: 1,598
Likes: 0
Received 0 Likes
on
0 Posts
RE: my current project: Hotrod 1:3,5 with pocked Quad engine
ORIGINAL: Mudgy
Hi,
I just noticed this also posted on the HAMB
cool car, looking good so far.
ORIGINAL: fibergless
Of course I will update my work here but I'll try to put at least one pic a day on : http://www.facebook.com/pages/Ford-1...3894141?v=wall
MERRY CHRISMAS!!
Of course I will update my work here but I'll try to put at least one pic a day on : http://www.facebook.com/pages/Ford-1...3894141?v=wall
MERRY CHRISMAS!!
Hi,
I just noticed this also posted on the HAMB
cool car, looking good so far.
12-26-2010, 04:14 AM
#38
Senior Member
Join Date: Aug 2006
Location: hometown, AUSTRALIA
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
RE: my current project: Hotrod 1:3,5 with pocked Quad engine
ORIGINAL: tonystott
I don't understand why you would use Facebook when you are already here in this forum
I don't understand why you would use Facebook when you are already here in this forum
12-26-2010, 11:46 AM
#39
Member
Thread Starter
Join Date: May 2010
Location: karlsruhe, GERMANY
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
RE: my current project: Hotrod 1:3,5 with pocked Quad engine
Due a Job change in the past months i wasn't able to continue to work on my project, so up next week I'll have more time to work on it more than in the past. I always want to share that built with all of you and many people from sevral forums, so I've decided to do it on Facebook . This too to put me under some pressure to work more and faster. My boss allows me to spend a few minutes to put the news on Facebook but not to spend to much time on all other forums. Thank you for your understanding
http://www.facebook.com/pages/Ford-1...3894141?v=wall
http://www.facebook.com/pages/Ford-1...3894141?v=wall
12-29-2010, 08:08 AM
#40
Member
Thread Starter
Join Date: May 2010
Location: karlsruhe, GERMANY
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
RE: my current project: Hotrod 1:3,5 with pocked Quad engine
the fake engine is finished! and looks great now ! tomorow i will paint the front axle
http://www.facebook.com/pages/Ford-1932-3-Windows-Hotrod-135-scale-RC-Project/128373623894141?v=wall#!/pages/Ford-1932-3-Windows-Hotrod-135-scale-RC-Project/128373623894141
http://www.facebook.com/pages/Ford-1932-3-Windows-Hotrod-135-scale-RC-Project/128373623894141?v=wall#!/pages/Ford-1932-3-Windows-Hotrod-135-scale-RC-Project/128373623894141
12-29-2010, 01:12 PM
#41
Senior Member
Join Date: Apr 2007
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
RE: my current project: Hotrod 1:3,5 with pocked Quad engine
ORIGINAL: nomobux
I'll jump over the the HAMB. What's the title of the thread ?? The HAMB moves FAST
ORIGINAL: Mudgy
Hi,
I just noticed this also posted on the HAMB
cool car, looking good so far.
ORIGINAL: fibergless
Of course I will update my work here but I'll try to put at least one pic a day on : http://www.facebook.com/pages/Ford-1...3894141?v=wall
MERRY CHRISMAS!!
Of course I will update my work here but I'll try to put at least one pic a day on : http://www.facebook.com/pages/Ford-1...3894141?v=wall
MERRY CHRISMAS!!
Hi,
I just noticed this also posted on the HAMB
cool car, looking good so far.
post #273.
http://www.jalopyjournal.com/forum/s...539419&page=14
There are some talented fellas out there. 1/8 scale plastic kits thread that Fibergless has posted on.
Engine is looking good Fibergless!!
12-30-2010, 05:16 AM
#44
Member
Thread Starter
Join Date: May 2010
Location: karlsruhe, GERMANY
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
RE: my current project: Hotrod 1:3,5 with pocked Quad engine
I hope so!,
i get a new carbutator from walbro today, so the first engine run is planned for next week.
i get a new carbutator from walbro today, so the first engine run is planned for next week.
12-30-2010, 06:48 AM
#45
Member
Thread Starter
Join Date: May 2010
Location: karlsruhe, GERMANY
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
RE: my current project: Hotrod 1:3,5 with pocked Quad engine
Thank you Splcrazy!, I've tried to install FG front hubs with brakes and it match perfect after some work. Ready for burnouts now!
http://www.facebook.com/pages/Ford-1...28373623894141
http://www.facebook.com/pages/Ford-1...28373623894141
06-09-2011, 08:39 PM
#48
Senior Member
RE: my current project: Hotrod 1:3,5 with pocked Quad engine
Hello!
What I wanted to ask you:
Where did you get all the exact dimensions from?
Do you even have original plans of this ´32 Ford Hotrod?
It would be very interesting for me to know that.
And here is the link to my own project:
http://www.rcgroups.com/forums/showthread.php?t=1444070
I´m not familiar with facebook.
Would you prefer to chat here, on rcgroups or per email?
What I wanted to ask you:
Where did you get all the exact dimensions from?
Do you even have original plans of this ´32 Ford Hotrod?
It would be very interesting for me to know that.
And here is the link to my own project:
http://www.rcgroups.com/forums/showthread.php?t=1444070
I´m not familiar with facebook.
Would you prefer to chat here, on rcgroups or per email?
08-21-2011, 12:32 AM
#50
Senior Member
RE: my current project: Hotrod 1:3,5 with pocked Quad engine
What a pity this was discontinued.
I love that ´32 Ford Hotrod!
I´m still interested in using some/many of the ideas provided here for my own 1/3 ´34 Ford 3-Window Coupe!
I love that ´32 Ford Hotrod!
I´m still interested in using some/many of the ideas provided here for my own 1/3 ´34 Ford 3-Window Coupe!