Smartech Bigfoot
 

Hey guys just wondering
Do CY Or Zenoah engines fit the Smartech Bigfoot?, if so which ones do fit.


Cheers,
Nathan

RE: Smartech Bigfoot
 

it comes with the cy so the cy fits

RE: Smartech Bigfoot
 

Mine came with a zenoah! :D The RC style engines fit. If you change motors you should get a metal motor mount at the same time.

RE: Smartech Bigfoot
 

Thanx guys, Use guys rock, Where do i get the MEtal Motor Mounts.

tahnx
Nathan

RE: Smartech Bigfoot
 

http://www.rc-car-online-shop.de/lsh...ng_alu,,,,.htm

This place should sort you out. Remember that smartech and carson are pretty much the same.

RE: Smartech Bigfoot
 

Hellya, the guy at fg-hopus.com was selling the HobbyThek (rc-car-online.de) alloy engine mounts for a while. He has had some trouble fullfilling orders recently but is a good guy to work with overall.

He sells the engine mounts for $90 plus shipping (he's in the Seattle area). I'd shoot him an email to see if he has any on hand ready to ship. If hellya doesn't have any on hand to ship then he will have to order from HobbyThek himself.

I'd also recommend the HobbyThek steel pinion for the Smartech truck. This is the gear that sits on the clutch bell on the engine. If you have a plastic pinion gear it will strip easy. fg-hopups.com sold me one for $30.

HobbyThek's shipping is steep at $40 USD and takes a while.

Another option for the alloy engine mounts is to go with an FG alloy small engine mount. The FG large engine mount will NOT work. I put a small alloy mount on and left the large mount plastic. I was able to Lock-tite the small mount screws down real tight. I haven't had any issues at all with engine movement. You can get an FG small alloy engine mount for less than $30 from several US dealers.

RE: Smartech Bigfoot
 

My Smartech Spider came with an engine that has a three bolt head instead of two like a cy or zenoah. It has no markings of manufacture on it. I wonder if its a new design cy engine?

RE: Smartech Bigfoot
 

My Firehammer stock engine had a 'CY' on the front of the serial number which is on the crankcase. I believe my Zenoah G260 starts with a 'G'.

Don't know if that will help.

To answer the original question, the CY, SIKK and Zenoah RC engines have the same mount points so you can use the same mounts.