Newbe
#1
Junior Member
Thread Starter
Join Date: Jan 2012
Location: Sligo, IRELAND
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Newbe
Hi all, I am have trouble getting my FMS software to work with my SKY-7037 channel transmitter i have a ninja 400 6ch RTF 2.4GHz helicopter and windows 7 on my laptop
any ideas.
I am new to rc helicopters.
thanks
any ideas.
I am new to rc helicopters.
thanks
#3
Senior Member
Join Date: Oct 2007
Location: FromeSomerset, UNITED KINGDOM
Posts: 830
Likes: 0
Received 0 Likes
on
0 Posts
RE: Newbe
to expand on Jorge's response:
go to the FMS web site and make sure you have the edition that will work with W7!
also if you could elaborate what kind of trouble you're having, i.e. pitch, roll, yaw not responding??
Matty
p.s. it may say it's a 6ch sim but in truth it's a 4ch!!
go to the FMS web site and make sure you have the edition that will work with W7!
also if you could elaborate what kind of trouble you're having, i.e. pitch, roll, yaw not responding??
Matty
p.s. it may say it's a 6ch sim but in truth it's a 4ch!!
#4
RE: Newbe
I tried everything I could find to get FMS (which came with my heli) to run on Wnindows 7. I gave up. But in my search I did find a free simulator for helis called helisim. It is setup to emulate a 450 size heli, not elaborate but it works for basic orientation and flight training. Download it here: http://www.marksfiles.net/HeliSim/ I have since bought Phoenix but for basic heli training helisim works great. I'm told it is better than FMS for heli training anyhow.
Jim
Jim